All Categories
Copymaster3D Premium PLA Filament 1.75mm 1KG - Magenta
£19.50 £16.25
SKU
TO-PRE-1KG-MAG
Brand
Secured and trusted checkout with
Related Products
Check items to add to the cart or
Aesthetic, biodegradable and reliable 3D printing
Premium PLA is a filament based on polylactide which belongs to aliphatic polymers. It shows full biodegradability. Carefully selected colour concentrates provide items manufactured of Premium PLA with intense colours in a broad spectrum. Moreover, the choice of an appropriate dye base for the pellets for filament extrusion ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of FDM/FFF 3D printers.
An unquestionable advantage of Premium PLA is a very low processing shrinkage. Thus its is particularly useful for large-size 3D printers without a closed build chamber. Premium PLA yields excellent surface quality and detail, producing reliable results. Items printed with Technology Outlet PLA demonstrate extremely high aesthetic properties due to the layer cohesion even at large inclination angles of item surfaces.
Key features:
Applications:
Packaging
Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber.
General information | |
| Color: | Black |
| Diameter: | 1.75mm |
| Dimensional tolerance: | ± 0.05mm |
| Verify your spool - preview of the diameter course of the entire spool: | YES |
| Printing temperature: | 185-230°C |
| Heated bed: | needed |
| Hot pad temperature: | 0-45°C |
| Printing speed: | 40-150mm/s |
| Net weight: | 1000g |
| Total weight: | 1400g |
| Spool outer diameter: | 200mm |
| Spool width: | 67mm |
| Spool inner diameter: | 52mm |
Physical & termal properties of raw material | |
| Specific Gravity: | 1.24 g/cc |
| MFR (210°C / 2.16kg), g/10 min: | 6 (D1238) |
| Heat Distortion Temperature: | 55°C |
| Tensile Strength at Break: | 53 MPa (ASTM D882) |
| Tensile Yield Strength: | 60 MPa (ASTM D882) |
| Tensile Modulus: | 3.5 MPa (ASTM D882) |
| Impact resistance: | 16 J/m (ASTM D256) |
| Material | PLA filament |
| Diameter | 1.75mm |
| Filament weight | 1 KG |
| Print temperature | 190 - 220°C |
| Best temperature | 200°C |
| Bed temperature | 40-50°C or turn off the heated bed |
| Compatibility | Most FDM 3D Printers |
| Package | 1kg/spool |
Accurate diameter: 1.75mm, variations + /-0.03mm, roundness +/-0.02mm;
We strongly recommend printing on a glass print surface with 3DLAC or a PEI FlexPlate for the best results possible.
| Spool Size | 1kg |
|---|---|
| Filament Thickness | 1.75 mm |
| Plastic Type | PLA |
| 3D Printing Technology | Filament (FDM/FFF) |
Write Your Own Review