SparkFun OpenPIR

£14.90 £12.42
SKU
S-SEN-13968
Brand
SparkFun

The SparkFun OpenPIR is a highly customizable Passive Infrared (PIR) sensor based around the NCS36000 PIR controller. Passive infrared (PIR) sensors are able to detect motion in a small/local area –-- they’re the sensor of choice in security systems, home automation and proximity-sensing applications. The OpenPIR allows you to set the sensitivity, trigger time and pulse mode of the motion sensor so you can tailor-fit it to your application!

The OpenPIR has a multitude of characteristics unique to itself, including two trimpots to adjust sensitivity (view distance) and the oscillator to control the length of time the output remains HIGH, as well as a trigger that supports two motion-detection modes: single-pulse and dual-pulse. Additionally, each OpenPIR is equipped with a reverse-entry green LED, which duplicates the status of the OUT pin. When motion is detected, the LED will illuminate; otherwise it will remain off.

The SparkFun OpenPIR supports a power supply range of 3VDC to 5.75VDC at 80µA standby (3mA when detecting motion) and is able to be connected via a standard 0.1" header or a 4-pin JST PH connector.


Need a custom board? This component can be found in SparkFun's À La Carte board builder. You can have a custom design fabricated with this component - and your choice of hundreds of other sensors, actuators and wireless devices - delivered to you in just a few weeks.

Features:

  • Voltage Supply Range: 3VDC to 5.75VDC
  • Standby Average Current: 80µA
  • Motion-Detected Average Current: 3mA (LED enabled)
  • Integrated 2−Stage Amplifier
  • Internal LDO to Drive Sensor
  • Internal Oscillator with External RC
  • Single or Dual Pulse Detection

Documents:

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:SparkFun OpenPIR