Compare Products

You have no items to compare.


Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By

Shopping Options

Spool Size
750g 4.54kg 750g to 4.54kg
Filament Thickness
  1. 1.75 mm (10)
  2. 2.85 mm (17)
Plastic Type
  1. ABS (4)
  2. Nylon (7)
  3. PETG (2)
  4. PLA (11)
  5. PLA / PHA (2)
  6. XT (2)
  1. Black (6)
  2. White (4)
  3. Yellow (1)
  4. Orange (4)
  5. Red (2)
  6. Brown (1)
  7. Blue (3)
  8. Light Blue (1)
  9. Green (2)
  10. Clear (2)
  11. Grey (2)
£0 £124 £0 to £124
  1. Colorfabb (4)
  2. Dagu (4)
  3. DFRobot (2)
  4. Hamid (1)
  5. Monsterfil (19)
  6. plux | wireless biosignals (1)
  7. RoboBuilder (1)
  8. RoboSavvy (4)
  9. RoboSavvy Plastics (4)
  10. Robotis (8)
  11. SparkFun (47)
Compare Products

You have no items to compare.


  1. MonsterFil - Pastel Orange PLA (1.75mm, 5 lbs / 2.26 kg) Sale
    Exc. VAT: £33.30 Inc. VAT: £39.96 £49.96

    The new Monsterfil 5lbs and 10lbs spools were designed to ensure longer print time with less frequent reel changes. MonsterFil filament has been developed to the highest specification to ensure great 3D printing results. The PLA is sourced from the most reputable chemical manufacturer certified world-wide, NatureWorks Ingeo™ Biopolymer 4032D and is extruded in high flow industrial monofilament plastic extrusion machines. The lengthy extrusion process keeps the filament at a constant tension of 6N that guarantees near perfect thickness with a maximum measured thickness variation of 3%.
  2. Bitalino Plugged Kit Sale
    Exc. VAT: £123.03 Inc. VAT: £147.64 £202.80

    BITalino is a low-cost toolkit to learn and prototype applications using body signals. It's for students, teachers, makers, artists, researchers, corporate R&D... no electrical skills required!

    The Plugged Kit is the same as the Freestyle Kit but only the sensor blocks are snapped out of the main board.

    It cames with cabled sensor connection for interchangeable use of our sensors and custom designs as well.

  3. SparkFun 6 Degrees of Freedom Breakout Sale
    Exc. VAT: £5.96 Inc. VAT: £7.15 £9.70

    The LSM303C is a 6 Degrees of Freedom (6DOF) inertial measurement unit (IMU) in a single package, specifically developed as an eCompass device. Due to the IC housing a 3-axis accelerometer and a 3-axis magnetometer combined with its low cost, the LSM303C was perfect for us to create this small breakout board just for you! Each LSM303C Breakout has been designed to be super-flexible and can be configured specifically for many applications. The LSM303C Breakout can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection!
  4. ProtoBoard - Square 2" Sale
    Exc. VAT: £2.18 Inc. VAT: £2.62 £3.40

    This is a very simple but handy, 2" square, double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) holes for mounting. Great for quickly prototyping stackable circuits.
  5. Thermoelectric Cooler Sale
    Exc. VAT: £6.16 Inc. VAT: £7.39 £10.00

    Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. The thermal tape listed below works very well to attach heat sinks to the hot side.
  6. USB to TTL Serial Cable Sale
    Exc. VAT: £7.52 Inc. VAT: £9.02 £12.20

    This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
  7. MyoWare Proto Shield Sale
    Exc. VAT: £1.23 Inc. VAT: £1.48 £2.00

    This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor. With this shield you will be able to use the area provided to solder on whatever custom circuitry you can come up with. This shield provides 8 x 15 solderable through-holes on a standard 0.1" grid.
  8. SparkFun OpenLog Sale
    Exc. VAT: £9.36 Inc. VAT: £11.23 £14.30

    The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 32GB. The OpenLog can store or "log" huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, for scientific or debugging purposes.
  9. Webcam - USB Sale
    Exc. VAT: £11.32 Inc. VAT: £13.58 £17.30

    This is a simple USB webcam that can be plugged into your computer or dev board and start capturing video right away. The resolution is 640x480, which is adequate for motion tracking or object detection, but don’t expect to use it for photography or movie making. This new version has added a microphone as well.
  10. RoboSavvy - White ABS Filament (2.88mm 1kg) Sale
    Exc. VAT: £19.97 Inc. VAT: £23.96 £29.95

    High quality ABS filament for use with 2.88mm extruders.

    RoboSavvy ABS is sourced from a plastic manufacturer with more than 20 years of experience in plastic extrusion guaranteeing that you get the best quality of 3D printing filament for your printer.