- Remove This Item Category: Wheeled
- Remove This Item Manufacturer: Dagu
- Remove This Item Manufacturer: HobbyKing
- Remove This Item Manufacturer: Robotis
Shopping Options
- Price
- Manufacturer
- AgileX (8)
- Dagu (13)
- DFRobot (4)
- HobbyKing (1)
- RoboSavvy (1)
- RoboSavvy Labs (2)
- Robotis (6)
- Trossen Robotics (7)
- YDLIDAR (2)
You have no items to compare.
Robotics
Loading, please wait...-
Exc. VAT: £21.25 Inc. VAT: £25.50
DAGU - Rover 5 Explorer PCB kit. The explorer kit provides the perfect interface between your Rover 5 2WD chassis and your micro-controller with all the hardware you need so you can start programming right away. -
Sale
Exc. VAT: £70.98 Inc. VAT: £85.18 £96.30
ROBOTIS DREAM Level 3 comes with the controller and teaches you the principles of servo motor control, usage of the touch sensor and IR sensors, and LED modules. This level will help you understand the flow chart to set up your ground work for programming. -
Exc. VAT: £197.67 Inc. VAT: £237.20
This is easily the most rugged and beefy robot chassis in its price range. The Wild Thumper 6-Wheel platform is the best of both worlds: It takes almost no time to go from un-boxing to rolling chassis, but it's also ready to be expanded on and makes great base for an Advanced Robot. -
Exc. VAT: £156.00 Inc. VAT: £187.20
This 4WD is the little brother of the 6WD Wild Thumper: It takes almost no time to go from un-boxing to rolling chassis, but it's also ready to be expanded on and makes great base for an Advanced Robot. -
Exc. VAT: £32.92 Inc. VAT: £39.50
Dagu - Rover 5 Robot Platform (2 motors + 2 encoders). The Rover 5 uses 2 independent motors, each with an optical quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels. -
Exc. VAT: £48.67 Inc. VAT: £58.40
If you're looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with an optical quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels. -
Exc. VAT: £197.67 Inc. VAT: £237.20
DAGU - Wild Thumper 6WD Black w/ Wheel Encoders (75:1 Gearboxes). This is easily the most rugged and beefy robot chassis in its price range. The Wild Thumper 6-Wheel platform is the best of both worlds: It takes almost no time to go from un-boxing to rolling chassis, but it's also ready to be expanded on and makes great base for an Advanced Robot. -
Exc. VAT: £262.67 Inc. VAT: £315.20
Robotis - Bioloid STEM Standard
STEM Standard consists of 7 example robots and 21 weeks of educational training. Unlike simple, repetitive program training, STEM Standard explains from the very basic of programming to the advanced scientific principles in details (4 bar linkage mechanism, centrifugal force, centripetal force, sound element, differential gear, steering mechanism, etc), so that it allows you self-directed learning by solving various problems on your own.
-
Exc. VAT: £187.67 Inc. VAT: £225.20
The BIOLOID STEM Expansion Kit is consisted of a variety of parts to build 9 examples robots (one at a time) over a period of 23 weeks. Unlike simple repetitive programs, the STEM expansion kit explains the combination of forces, spacial coordinates, principles of bipedal motion, bio-mimetic engineering and much more, allowing you to learn by solving various problems on your own. -
Exc. VAT: £158.17 Inc. VAT: £189.80
This 4WD is the little brother of the 6WD Wild Thumper: It takes almost no time to go from un-boxing to rolling chassis, but it's also ready to be expanded on and makes great base for an Advanced Robot. -
Exc. VAT: £10.92 Inc. VAT: £13.10
The Magician Chassis is our latest robot platform from Dagu. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller. This kit includes all of the parts needed to assemble the chassis as well as a 4xAA battery holder with barrel jack termination. -
Exc. VAT: £45.00 Inc. VAT: £54.00
The Dagu Multi Chassis Tank (Explorer vehicle) can be operated using the supplied mini driver board and can be programmed from your PC. It's also controllable via R/C and is very maneuverable. -
From: £288.20
To: £392.44
The Wild Thumper Pack comes with everything you need to remote control your Wild Thumper and get into High Power, all terrain robotics - with Intelligent Microcontrollers! The Kit includes the Wild Thumper chassis, the T'Rex Motor Controller, one 7.2V 5000mah LiPo battery and a power switch to manage all the amps this beast consumes, you can choose to add a LiPo charger, a 12v PSU, an RC 2.4Ghz Remote controller and a bluetooth module. -
Exc. VAT: £400.67 Inc. VAT: £480.80
TurtleBot3 is a small, low cost, fully programmable, ROS based mobile robot. It is intended to be used for education, research, hobby and product prototyping.
-
Exc. VAT: £26.00 Inc. VAT: £31.20
This is the Multi-Chassis Basic 4WD Kit, an easy to assemble and use robot chassis platform. The Multi-Chassis kit provides you with everything you need to give your robot a fast four wheel drive platform with plenty of room for expansion to add various sensors and controllers. All you need to do is supply is a basic motor driver and power and you’ll be ready to drive! -
Exc. VAT: £1,021.08 Inc. VAT: £1,225.30
TurtleBot3 is a small, low cost, fully programmable, ROS based mobile robot. It is intended to be used for education, research, hobby and product prototyping.
-
£70.53Rover 5 Tank Chassis is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis’s the clearance can be adjusted by rotating the gearboxes in 5-degree increments. “Stretchy” rubber treads maintain tension as the clearance is raised. -
£86.28The Rover 5 tracked chassis, made by Dagu Electronics, is a durable robot platform with caterpillar treads that let it drive over many types of surfaces and uneven terrain. All you need to get the chassis moving is a robot controller or motor controller to drive the four built-in DC motors, which powered by the included 6-AA battery holder (AA batteries sold separately). A small Phillips screwdriver and an Allen wrench are included for working with the chassis. -
Exc. VAT: £525.42 Inc. VAT: £630.50
Designed for Education, Hobby , Entertainment and Competition.
This kit provides excellent opportunity to learn technologies required in future industries such as electronic control, AI, 3D printing, coding, camera vision processing and manipulation.
