Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Manufacturer: Inventables
  2. Remove This Item Manufacturer: SparkFun

Shopping Options

Category
  1. Electronics (38)
Use
  1. Engraving (1)
  2. V carving (1)
Cutting Material
  1. Aluminium (1)
  2. Corian (1)
  3. Linoleum (1)
  4. Plastic (1)
  5. Plywood (1)
  6. Soft Metals (1)
  7. Wood (1)
Type
  1. Engraving (1)
  2. V bit (1)
Price
£0 £144 £0 to £144
Manufacturer
  1. CH Robotics (1)
  2. Dagu (38)
  3. DFRobot (23)
  4. Hamid (1)
  5. HobbyKing (9)
  6. Inventables (6)
  7. JtechPhotonics (5)
  8. Kondo (1)
  9. littleBits (1)
  10. Makerbot (2)
  11. NooElec (2)
  12. RoboBuilder (3)
  13. RoboSavvy (8)
  14. RoboSavvy Labs (3)
  15. Robotis (273)
  16. SparkFun (39)
  17. Trossen Robotics (38)
Compare Products

You have no items to compare.

Robotics

  1. Exc. VAT: £13.17 Inc. VAT: £15.80
    This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.
  2. Exc. VAT: £14.42 Inc. VAT: £17.30
    This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes white LED backlight.
  3. Exc. VAT: £18.50 Inc. VAT: £22.20
    This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board!
  4. Exc. VAT: £8.75 Inc. VAT: £10.50
    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need ~11 general I/O pins to interface to this LCD screen. Includes red LED backlight.
  5. Exc. VAT: £14.17 Inc. VAT: £17.00
    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need ~11 general I/O pins to interface to this LCD screen. Includes white LED backlight.
  6. Exc. VAT: £13.08 Inc. VAT: £15.70
    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need ~11 general I/O pins to interface to this LCD screen. Includes yellow LED backlight.
  7. Exc. VAT: £16.08 Inc. VAT: £19.30
    This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the smaller 128x64 pixel display, and provides a simple serial interface to a full range of controls.
  8. Serial Enabled 16x2 LCD - White on Black 5V Sale
    Exc. VAT: £16.15 Inc. VAT: £19.38 £25.00

    This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.
  9. Exc. VAT: £6.58 Inc. VAT: £7.90
    The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended to be used as a cell phone screen. This one is mounted on an easy to solder PCB.
  10. Exc. VAT: £14.17 Inc. VAT: £17.00
    This is similar to other 16x2 character LCDs that you've seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check below for an Arduino example). You will need ~11 general I/O pins to interface to this LCD screen, plus an extra 3 pins for the RGB backlight.
  11. Exc. VAT: £39.58 Inc. VAT: £47.50
    The uOLED-96-G2(GFX) is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX-GFX2 graphics processor that delivers ‘stand-alone’ functionality to any project. Powerful graphics, text, image, animation and countless more features are built inside the GOLDELOX-GFX2 chip.
  12. Exc. VAT: £30.67 Inc. VAT: £36.80
    The µLCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology with an embedded GOLDELOX-GFX2 graphics processor that delivers ‘stand-alone’ functionality to any project. Powerful graphics, text, image, animation and countless more features are built inside the GOLDELOX-GFX2 chip.
  13. Exc. VAT: £43.75 Inc. VAT: £52.50
    The µOLED-128-G2 is a compact display module from 4D Systems using the latest state of the art Passive Matrix OLED (PMOLED) technology with an embedded GOLDELOX graphics processor that delivers ‘stand-alone’ functionality to any project.
  14. Exc. VAT: £58.50 Inc. VAT: £70.20
    The 4.3” resistive touch LCD from 4D Systems is a cape specifically designed for the BeagleBone Black, and provides a 4.3” primary display for the BBB for direct user interaction and information display. The BeagleBone Black connects directly to the back of the LCD cape, and provides everything the cape requires such as power and display signals.
  15. Exc. VAT: £143.17 Inc. VAT: £171.80
    This display module from 4D systems is the uLCD-70DT, a 7.0” intelligent touchscreen LCD powered by the DIABLO16 graphics processor. The uLCD-70DT is designed for applications demanding a large intelligent display module, and is the largest size available from 4D Systems.
  16. Exc. VAT: £13.92 Inc. VAT: £16.70
    The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s "micro", but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resorting to serial output, and teaching a little game theory while creating a fun, Arduino-based video game. Most important of all, though, is the Micro OLED is easy to control over either an SPI or I2C interface.
  17. Exc. VAT: £14.17 Inc. VAT: £17.00
    The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s "micro", but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This shield is perfect for adding graphics to your Photon, displaying diagnostic information without resorting to serial output, and teaching a little game theory.
  18. Exc. VAT: £60.75 Inc. VAT: £72.90
    This 7" Raspberry Pi Touchscreen LCD provides you with the ability to create a standalone device that can be utilized as a custom tablet or an all-in-one interactive interface for a future project using your Raspberry Pi 3. Each LCD features a full color 800 x 480 capacitive touch display that connects to the Pi via an included adapter board which handles all of your power and signal conversion needs. An updated version of Raspbian OS on the A+, B+ and Pi2B is required for the display to work (the display does not work with the current version of Raspbian available on the Model A or B).
  19. Exc. VAT: £11.75 Inc. VAT: £14.10
    The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. The 128x32 monochrome display is controlled with the popular SSD1306 IC, and is a great way to display debug information and to visualize data without the need for a serial terminal. The board matches the Teensy 3 form factor perfectly, and was designed from the ground up to be as flexible as possible while still being able to nest down into a low-profile addition for the Teensy.
  20. OLED Expansion Board for Onion Omega Sale
    Exc. VAT: £11.32 Inc. VAT: £13.58 £17.00

    The OLED Expansion Board adds a low-power 0.96″ monochrome display to your Omega. With a resolution of 128×64, you can use it to display text, images and even animations. This Expansion Board is very useful for displaying status information, web data and small logos. If you’re interested in writing text, 21 characters can fit on each horizontal row, with seven rows in total.
  21. Exc. VAT: £13.92 Inc. VAT: £16.70
    The SparkFun Qwiic Micro OLED Breakout is a Qwiic-enabled version of our popular Micro OLED display! The small monochrome, blue-on-black OLED screen presents incredibly clear images for your viewing pleasure. It’s “micro,” but it still packs a punch --- the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next project and displaying diagnostic information without resorting to a serial output, all with the ease of use of our own Qwiic Connect System!
  22. Exc. VAT: £28.33 Inc. VAT: £34.00
    The Chibi Scope is the perfect companion to your Chibi Chip Microcontroller Board. This display accessory for the Love to Code Chibitronics line is a small board equipped with an OLED screen that has been designed to help you understand what’s going on inside your Chibi Chip. It packs three essential functions — text, volts, and wave — into one compact package. The Chibi Scope connects to your Chibi Chip using the three included alligator clips; wire up +5V, GND, and TXT, and you’re ready to go.
  23. Exc. VAT: £40.58 Inc. VAT: £48.70
    It's typically better to have a flexible mind and outlook on life, so the same should go for OLED displays! The SparkFun Flexible Grayscale OLED Breakout is pretty much exactly what the name says it is: a small grayscale OLED that can be bent up to a 40mm radius without any worry of damage. Attached to a controller board, the actual display is less than 0.5mm thick and can display some impressive graphics (including BMP images, a variety of text options, or even a game of Pong) with great contrast.
  24. Exc. VAT: £14.17 Inc. VAT: £17.00
    The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now communicate in three different ways: serial, I2C, and SPI. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.
  25. Exc. VAT: £14.17 Inc. VAT: £17.00
    The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now communicate in three different ways: serial, I2C, and SPI. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.
  26. Exc. VAT: £21.83 Inc. VAT: £26.20
    This LCD Touchscreen HAT fits snuggly on top of the Raspberry Pi, practically form fitting on top of it so as not to compromise the over all dimensions of the credit card sized single board computer. The resistive touchscreen provides you with an easy way to display information coming off of the Raspberry Pi and the OS currently running on it.
  27. Exc. VAT: £53.42 Inc. VAT: £64.10
    The PaPiRus is a HAT for the Raspberry Pi that is capable of driving an ePaper display with ease by making use of the existing open source RePaper codebase and examples. ePaper / eInk is a display technology that mimics the appearance of ink on paper. Unlike conventional displays, ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
  28. Exc. VAT: £37.08 Inc. VAT: £44.50
    PaPiRus Zero is an ePaper / eInk screen HAT designed for the Raspberry Pi Zero and the Raspberry Pi Zero W. It's one of the first true low power displays for the Pi Zero mini computer. ePaper / eInk is a display technology that mimics the appearance of ink on paper. Unlike conventional displays, ePaper reflects light just like ordinary paper and is capable of holding text and images indefinitely, even without electricity.
  29. Exc. VAT: £3.25 Inc. VAT: £3.90
    Here's a very cool TFT LCD display with 128 x 160 resolution and 18-bit color depth. The most unique feature of the screen is the ability to read back the display memory across the bi-directional data lines. This solves a big problem with most displays - the need for a lot of memory to create effects like transparency or overlapping windows. This is an ideal component to include in your next custom project to advance your embedded hardware/software skills.
  30. Exc. VAT: £87.25 Inc. VAT: £104.70
    Clear screens are no longer a thing of the Sci-Fi world! The Qwiic Transparent OLED HUD is SparkFun's answer to all of your futuristic transparent HUD needs. Designed for use in vehicle heads-up displays, this OLED panel is brilliant in the dark but easily visible in daylight. The display is "area colored" meaning that while no one segment can change colors, there are different colored segments on the display.
  31. Exc. VAT: £27.25 Inc. VAT: £32.70
    The future is here! The SparkFun Qwiic Transparent Graphical OLED Breakout allows you to display custom images on a transparent screen using either SPI or I2C connections. Brilliantly lit in the dark and still visible by daylight, this OLED sports a display area of 128x64 pixels, 128x56 of which are completely transparent. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system making it easy to get started with your own images. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
  32. Exc. VAT: £24.33 Inc. VAT: £29.20
    The SparkFun TFT LCD Breakout is a versatile, colorful, and easy way to experiment with graphics or create a user interface for your project. With a 4-wire SPI interface and microSD card holder, you can use this breakout to easily add visual display/interface capabilities to a project as well as providing all the storage you might need for multimedia files.
  33. Exc. VAT: £17.42 Inc. VAT: £20.90
    Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module. It can display a maximum of 16 lines of text content, and display pictures and animation on its 1.5-inch display. On the backside, there are two Qwiic connectors. With the Qwiic connect system no soldering is required to connect it to the rest of your system.
  34. Exc. VAT: £8.17 Inc. VAT: £9.80
    This OLED Display from Zio can display up to 3 lines of text and features 128x32 pixels in a small 0.91” (diagonal) frame. As an OLED, this display does not have a backlight layer (unlike LCDs) and therefore it’s thinner, consumes less power, and has higher contrast.
  35. Exc. VAT: £18.50 Inc. VAT: £22.20
    The LCD Shield gives your OpenMV Camera the ability to display what it sees on-the-go while not connected to your computer. This shield features a 1.8" 128x160 16-bpp (RGB565) TFT LCD display with a controllable backlight. Your OpenMV Cam's firmware already has built-in support for controlling the LCD Shield using the LCD module.
  36. Exc. VAT: £17.75 Inc. VAT: £21.30
    The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now communicate in three different ways: serial, I2C, and SPI. This version comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.
  37. Exc. VAT: £17.75 Inc. VAT: £21.30
    The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now communicate in three different ways: serial, I2C, and SPI. This comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.
  38. Exc. VAT: £22.17 Inc. VAT: £26.60
    The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now communicate in three different ways: serial, I2C, and SPI. This version comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.
  39. £57.23
    This pack provides you a functional solution to access your car electronics information. You can read data from your car and display it in the LCD Screen. If you have one microSD card use it to log your car data.

    The CAN-BUS Arduino Shield provides you the ability to connect one external GPS module (not included), connect the serial LCD and navigate in your software menu throught a Joystick control, you can also put one microSD card and log all the data from your car.

    Kit Contents:

  40. Exc. VAT: £23.50 Inc. VAT: £28.20

    A high precision tool holder for your Dewalt router

     

    Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.

  41. Stepper Motor - NEMA 23 Sale
    Exc. VAT: £31.66 Inc. VAT: £37.99 £58.80

    This is a bi-polar (4 wire) stepper motor with a 1/4" (0.25") diameter shaft.
  42. Exc. VAT: £2.83 Inc. VAT: £3.40
    30 degree engraving bit for wood, plastic and linoleum. Best for Cutting plastics, woods, and soft materials like linoleum
  43. Exc. VAT: £9.42 Inc. VAT: £11.30
    Convert X-Carve 2015 to X-Carve 2016 eccentric spacers
  44. Exc. VAT: £18.50 Inc. VAT: £22.20
    Carbide Tipped Single Flute Straight
  45. Exc. VAT: £29.58 Inc. VAT: £35.50
    For natural woods, composite plastics and woods, and foam