Original WorkBee Power Supply & Emergency Stop

As low as £149.95 £124.96

SKU
OZN-POWER
Brand
Ooznest
Customize Original WorkBee Power Supply & Emergency Stop

* Required Fields

Your Customization
Original WorkBee Power Supply & Emergency Stop
Original WorkBee Power Supply & Emergency Stop

In stock

£149.95 £124.96

Summary

    Original WorkBee Power Supply & Emergency Stop as included in the WorkBee Z1+ CNC Machine. The WorkBee uses the mighty Meanwell HLG Series Power supply. It is a IP65 rated fully sealed unit, meaning it is totally dust tight with a vacuum seal – there is no way dust is getting into this beast!


    The Power supply’s input range is compatible with all the standard voltage and frequencies used around the world and will automatically adjust accordingly. The input plug can be chosen as either UK, EU or US, no adaptors needed!


    EMERGENCY STOP


    As part of the package an Emergency Stop Push Button is included for added safety. It is important to be able to isolate the power and stop the machine immediately should something occur when in operation. This is even more important when using a CNC Machine!


    Pre-assembled to the power supply, the emergency stop is fully tested so it is ready to just wire straight into the controller. Hardware is provided to screw both the power supply and emergency stop to your workbench.


    WHAT YOU WILL BE GETTING


  • 1 x Original WorkBee Power Supply
  • 1 x Mains Cable for your chosen power version
  • 1 x Emergency Stop
  • 8 x Workbench fixing screws
  • Preassembled with output cable to connect to the controller input terminals

  • Specification


     Input Voltage Input Current Frequency Input Power Output Voltage Output Current Output Power
     100-240V 3.85/1.6A 60/50Hz 385W 24V 13.34A 320W

    0
    Rating:
    0% of 100
    Write Your Own Review
    You're reviewing:Original WorkBee Power Supply & Emergency Stop