Due to the current COVID-19 situation shipping delays are expected
Fully assembled Emblaser 2, Software, Tool and Lens Cleaning Kit, 110-240 Volt Power Supply with an EU plug, all required leads, fume extraction hose & external fume filtration system.
Use you Emblaser indoors without needing to vent fumes out through a window. The Filter system is very quiet and uses a set of filters containing activated carbon to remove visible fumes. Please Note: Some odour may still be present after filtration depending on the material.
One of the incredible features of the Emblaser 2 is true 3D cutting & engraving. You can automatically adjust the height of the laser while cutting and engraving to gain an extra dimension of control.Multi PassTMP-01Cut through thicker materials by setting your laser to automatically lower with multiples passes. Create 3D engravings with depth or automatically adjust the sharpness of your laser to create sharp lines or soft fills.
Working on larger materials is now possible with a 500mm x 300mm (19.66″ x 11.81″) work area. The maximum material height has also been increased to 50mm (1.97″)
Our 2nd Generation Laser Unit and electronics set a new standard for power and efficiency.
Use your Emblaser 2 wirelessly or enjoy the reliability of a direct USB connection. The choice is yours.
An In-built camera shows a live view of the workspace allowing easy alignment of materials.
‘Material Ignition Alert’, or ‘MIA’ constantly monitors for the potential ignition of a material, a situation that may arise in any laser cutter. If detected, MIA places the machine is a safety mode and sounds a warning alarm.
Air-Assist increases cutting performance and creates cleaner cuts by injecting a stream of high pressure air into the cutting region. Traditionally only available in industrial machines, the Emblaser 2 comes ready to accept our air-assist accessory.
Clearing fumes is critical to maintaining clean optics and optimal cutting. Use the inbuilt fume extractor to vent fumes outdoors or add the our Fume Filter System to safely filter fumes for complete indoor use.
|Fabric - Cotton||3mm||Y||Y|
|Fabric - Felt (All colors except white)||6mm||N||Y|
|Leather - Brown Vegetable Tanned (Treatment & color dependant. Air-Assist recommended.)||4mm||Y||Y|
|Paper/Card - Corrugated Cardboard||6mm||Y||Y|
|Paper/Card - Pasteboard||2.6mm||Y||Y|
|Paper/Card - Plain Paper (Any colour)||3mm||Y||Y|
|Plastic - Acrylic Black||5mm||Y||Y|
|Plastic - Acrylic Green, Red Yellow||3mm||Y||Y|
|Plastic - Acrylic Translucent (tinted)||3mm||Y||N|
|Plastic - Acrylic Blue||3mm||Y||N|
|Plastic - Acrylic Transparent & White||3mm||N||N|
|Plastic - Polypropylene (Air-Assist recommended.)||3mm||Y||Y|
|Plastic - Styrene||1.5||Y||Y|
|Wood - Birch Plywood||6mm||Y||Y|
|Wood - Balsa||10mm||Y||Y|
|Wood - Hardwood Oak||3.8mm||Y||Y|
|Wood - MDF||6mm||Y||Y|
|Corkboard (Air-Assist required.)||3mm||Y||Y|
|Rubber (Air-Assist recommended.)||2mm||Y||Y|
Work with the software you are familiar with to create your designs. LightBurn will import all standard formats from software such as Adobe Illustrator, Photoshop, Inkscape, Corel Draw etc.
Precisely cut out your artwork or create incredible engravings from your photos all in the one place. LightBurn gives you full control over the Emblaser 2.
LightBurn is fully compatible with both Windows and OSX. Run it on your favourite computer or laptop, even over Wifi!
|External Dimensions||540mm x 720mm x 200mm (21.25" x 28.35" x 7.8")|
|Material Capacity||500mm x 300mm x 50mm (19.66" x 11.81"x 1.97")|
|Laser Unit Type||Solid-State Diode Equivalent to 15-20watt CO2 laser|
|Classification||Class I The safest laser device rating available. Hardware|
|3D Cutting & Engraving, fully software controlled.|
|Camera for material alignment.|
|Wifi & USB Connectivity|
|Fume Extraction, built-in.|
|Internal Workspace Lighting|
|Fume Filtration System|
|External Fume Filtration System|