Designed originally for the Rover 5 chassis this driver PCB is ideal for any small robot
using either Omni or Mecanum wheels. Current sensing for each motor allows the
processor to determine if a motor has stalled or is under excessive load.
In many robotic applications it is a requirement to provide continuous power supply without having to reset the system when changing batteries or when switching between DC power supply and battery source. RoboSavvy HotSwap Power Board 1.0 is designed to provide continuous power to a robot allowing the interchangeable use of two DC power sources
BT-410 dongle converts two interfaces: USB 2.0 interface and Bluetooth 4.0 Low Energy interface (master function). That is, if you connect BT-410 dongle to the PC, it can be paired with BT-410 Slave module to exchange data (1:1 communication).
ROBOTIS OP3 is an affordable, miniature humanoid robot platform with advanced computational power, sophisticated sensors, high payload capacity, and dynamic motion ability to enable many exciting research and education activities.
OpenTracker v2 is the first 100% Arduino compatible, fully open source, commercial grade GPS/GLONASS vehicle tracker development board that comes with a free web interface for tracking.
The OpenTracker v2 hardware includes the same powerful 32-bit ARM controller as the Arduino DUE, a GSM/GPRS modem for wireless connectivity, a GPS/GLONASS module with Assisted-GPS, CAN-BUS, plenty of I/O, and a wide operating temperature range of -35°C to +80°C.