Filtern nach
- Diesen Artikel entfernen Marke: Omnima
- Diesen Artikel entfernen Marke: Robotis
- Diesen Artikel entfernen Marke: RoboSavvy Labs
Einkaufsoptionen
- Kategorie
- Microcontrollers (3)
- Robot Controllers (8)
- Servo Drivers (7)
- USB - RS232 - RS485 - I2C (4)
- Stall Torque (N.m)
- Stall Current (A)
- Max No Load Speed (rpm)
- Voltage (V)
- Preis
- Marke
- Dagu (5)
- DFRobot (6)
- easyVR (1)
- Inventables (1)
- Omnima (0)
- RoboSavvy Labs (1)
- Robotis (11)
Artikel vergleichen
Sie haben keine Artikel auf der Vergleichsliste.
Controllers & Drivers
Loading, please wait...-
exkl. MwSt.: 102,24 € inkl. MwSt.: 122,69 €
Description: CM-700 consists of a CPU, TTL/RS485 communication circuit, and is a control module type controller with ZIG-110 connector. -
exkl. MwSt.: 30,12 € inkl. MwSt.: 36,14 €
Robotis - CM-100A Controller -
exkl. MwSt.: 111,69 € inkl. MwSt.: 134,03 €
In many robotic applications it is a requirement to provide continuous power supply without having to reset the system when changing batteries or when switching between DC power supply and battery source. RoboSavvy HotSwap Power Board 1.0 is designed to provide continuous power to a robot allowing the interchangeable use of two DC power sources -
Verkauf
exkl. MwSt.: 18,43 € inkl. MwSt.: 22,11 € 40,30 €
BT-410 dongle converts two interfaces: USB 2.0 interface and Bluetooth 4.0 Low Energy interface (master function). That is, if you connect BT-410 dongle to the PC, it can be paired with BT-410 Slave module to exchange data (1:1 communication). -
exkl. MwSt.: 8,98 € inkl. MwSt.: 10,78 €
OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3.
-
Verkauf
exkl. MwSt.: 36,18 € inkl. MwSt.: 43,42 € 54,22 €
ROBOTIS OP3 is an affordable, miniature humanoid robot platform with advanced computational power, sophisticated sensors, high payload capacity, and dynamic motion ability to enable many exciting research and education activities. -
exkl. MwSt.: 162,76 € inkl. MwSt.: 195,32 €
OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up.
-
exkl. MwSt.: 90,36 € inkl. MwSt.: 108,43 €
The CM-530 Controller features an 32bit Arm Cortex M3 processor and combines a CPU, TTL communication board (3pin Dynamixel bus), status LED, input buttons, GP I/O ports, buzzer and Sound sensor.
It is compatible with the AX and MX series, and the communication is handled by the native USB connection to the PC and IR, Zigbee or Bluetooth for Wireless control. -
-
exkl. MwSt.: 104,02 € inkl. MwSt.: 124,82 €
Features
CM-550 is a controller that includes a MCU, DYNAMIXEL TTL Comunication board, BLE Slave communication module, Gyro Accelerometer, Temperature sensor, Buzzer, RGB LED, Sensor ports, MIC, etc.
BLE slave module is included.
With Micro USB Port, it can connect via PC and USB comm.
-
exkl. MwSt.: 27,03 € inkl. MwSt.: 32,44 €
The OpenCM 485 Expansion Board connects to the OpenCM9.04 controller to connect Dynamixels that support RS-485 and TTL. Battery connectors for batteries such as LIPO and Li-ion can be connected, and SMPS connector can be connected as well. -
exkl. MwSt.: 45,18 € inkl. MwSt.: 54,22 €
Connect your DYNAMIXEL servos to your computer or SBC.
Up to 6Mbps on the servo BUS
