Artikel vergleichen

Sie haben keine Artikel auf der Vergleichsliste.

RoboSavvy
Kategorien

Warenkorb

0 item 0,00 €

My Cart -

0 item
Filtern nach

Einkaufsoptionen

Kategorie
  1. Microcontrollers (9)
  2. DC Motor Drivers (6)
  3. Robot Controllers (12)
  4. Stepper Motor Drivers (1)
  5. Servo Drivers (10)
  6. USB - RS232 - RS485 - I2C (5)
Stall Torque (N.m)
3.1 4.2 3.1 to 4.2
Stall Current (A)
1.2 1.5 1.2 to 1.5
Max No Load Speed (rpm)
27 37 27 to 37
Voltage (V)
10 14.8 10 to 14.8
Preis
0 € 177 € 0 € to 177 €
Marke
  1. Dagu (5)
  2. DFRobot (6)
  3. easyVR (1)
  4. Inventables (1)
  5. Omnima (1)
  6. RoboSavvy Labs (1)
  7. Robotis (11)
Artikel vergleichen

Sie haben keine Artikel auf der Vergleichsliste.

Controllers & Drivers

  1. Spider Controller with ATmega 2560 Verkauf
    exkl. MwSt.: 28,40 € inkl. MwSt.: 34,08 € 60,56 €

    The Spider controller is Back!

    Arduino compatible robot controller that can control up to 48 servos!

    Now powered by an ATmega 2560

  2. ROBOTIS BT-410 Dongle Verkauf
    exkl. MwSt.: 18,69 € inkl. MwSt.: 22,42 € 40,86 €

    BT-410 dongle converts two interfaces: USB 2.0 interface and Bluetooth 4.0 Low Energy interface (master function). That is, if you connect BT-410 dongle to the PC, it can be paired with BT-410 Slave module to exchange data (1:1 communication).
  3. DFRobot - Flyduino-A 12 Servo Controller (Arduino Compatible) Verkauf
    exkl. MwSt.: 13,15 € inkl. MwSt.: 15,78 € 25,38 €

    This is probably the smallest Arduino controller speically designed for controlling the servo. It features a 12 standard servo control capbility with Xbee socket which can be used to control helicopter or UAV via the Xbee link. The feather weight (7.5g) make it an ideal controller for those application that has limited payload. The build in regulator is allow the input voltage vary from 3.5-8V which fits the most power supply without any modification.
  4. exkl. MwSt.: 103,68 € inkl. MwSt.: 124,42 €
    Description: CM-700 consists of a CPU, TTL/RS485 communication circuit, and is a control module type controller with ZIG-110 connector.
  5. exkl. MwSt.: 113,26 € inkl. MwSt.: 135,91 €
    In many robotic applications it is a requirement to provide continuous power supply without having to reset the system when changing batteries or when switching between DC power supply and battery source. RoboSavvy HotSwap Power Board 1.0 is designed to provide continuous power to a robot allowing the interchangeable use of two DC power sources
  6. exkl. MwSt.: 30,54 € inkl. MwSt.: 36,65 €
    Robotis - CM-100A Controller
  7. exkl. MwSt.: 14,42 € inkl. MwSt.: 17,30 €
    Designed originally for the Rover 5 chassis this driver PCB is ideal for any small robot using either Omni or Mecanum wheels. Current sensing for each motor allows the processor to determine if a motor has stalled or is under excessive load.
  8. exkl. MwSt.: 9,68 € inkl. MwSt.: 11,61 €

     OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. 

  9. exkl. MwSt.: 124,27 € inkl. MwSt.: 149,12 €
    OpenTracker v2 is the first 100% Arduino compatible, fully open source, commercial grade GPS/GLONASS vehicle tracker development board that comes with a free web interface for tracking. The OpenTracker v2 hardware includes the same powerful 32-bit ARM controller as the Arduino DUE, a GSM/GPRS modem for wireless connectivity, a GPS/GLONASS module with Assisted-GPS, CAN-BUS, plenty of I/O, and a wide operating temperature range of -35°C to +80°C.
  10. exkl. MwSt.: 176,24 € inkl. MwSt.: 211,50 €

    OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up.