Artikel vergleichen

Sie haben keine Artikel auf der Vergleichsliste.

DE
Kategorien

Warenkorb

0 item 0,00 €

My Cart -

0 item
Filtern nach

Einkaufsoptionen

Kategorie
  1. Microcontrollers (9)
  2. DC Motor Drivers (6)
  3. Robot Controllers (12)
  4. Stepper Motor Drivers (1)
  5. Servo Drivers (10)
  6. USB - RS232 - RS485 - I2C (4)
Max No Load Speed (rpm)
27 37 27 to 37
Stall Torque (N.m)
3.1 4.2 3.1 to 4.2
Stall Current (A)
1.2 1.5 1.2 to 1.5
Voltage (V)
10 14.8 10 to 14.8
Preis
0 € 152 € 0 € to 152 €
Marke
  1. Dagu (5)
  2. DFRobot (6)
  3. easyVR (1)
  4. Inventables (1)
  5. RoboSavvy Labs (1)
  6. Robotis (11)
Artikel vergleichen

Sie haben keine Artikel auf der Vergleichsliste.

Controllers & Drivers

  1. 8,34 €

     OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. 

  2. Robotis CM-150 Verkauf
    37,08 € 41,90 €

    ROBOTIS OP3 is an affordable, miniature humanoid robot platform with advanced computational power, sophisticated sensors, high payload capacity, and dynamic motion ability to enable many exciting research and education activities.
  3. 151,10 €

    OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up.

  4. 119,08 €
    OpenTracker v2 is the first 100% Arduino compatible, fully open source, commercial grade GPS/GLONASS vehicle tracker development board that comes with a free web interface for tracking. The OpenTracker v2 hardware includes the same powerful 32-bit ARM controller as the Arduino DUE, a GSM/GPRS modem for wireless connectivity, a GPS/GLONASS module with Assisted-GPS, CAN-BUS, plenty of I/O, and a wide operating temperature range of -35°C to +80°C.
  5. 21,09 €
    This is the upgraded DFRduino Mega 2560 V3.0 which is now fully compatible with Arduino Mega 2560 R3.
  6. 14,19 € ab: 12,78 €
    Arduino compatible board with built in dual motor driver.
  7. 14,19 €
    DFRobot - Dual 2A DC Motor Controller (L298N)
  8. 82,26 €
    The T’REX controller from DAGU is an Arduino compatible robot controller designed to power and control servos and brushed motors. Supplied sample code allows the controller to connect to a radio control receiver, external controller via I²C or optional bluetooth interface. A sample app allows the controller to be controlled by an Android phone or tablet.
  9. 21,66 €

    ComMotion communications and smart Motion control in one shield