The Multi Chassis Tank (Explorer vehicle) can be operated using the supplied mini driver board and can be programmed from your PC. It's also controllable via R/C and is very maneuverable.
It features an aluminum chassis which has been pre drilled giving you infinite mounting points for fitment of a multitude of sensors or accessories. It has two 48:1 geared motors with metal output shafts.
Included is the Mini driver board which can be programmed from your PC to control not only the direction the robot travels, but also the accessories you want to fit such as arms and grabbers.
- Rubber Tracks For Maximum Traction
- 48:1 Gear Ratio for Maximum Torque
- Robust Aluminum Body
- All Hardware, Fixings and Tools
- 2 x DGServo S3003
- Mini Driver Board
- PC-USB Interface
- USB Cable
- HC-SR04 Ultrasonic Module
- Software CD-ROM
- Size: 157 x 149 x 60mm (chassis only)
- Weight: 775g
- Drive Type: Rubber Tracks
- Gear Ratio: 48:1
- Motors: 2 x DG01D Motor (Metal Output Shaft)
- Servo: DGServo S3003 Analogue
Ultrasonic Sensor - HC-SR04
This is the HC-SR04 ultrasonic ranging sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power), Trig (Trigger), Echo (Receive), and GND (Ground). You will find this sensor very easy to set up and use for your next range-finding project!.