1. Dual Port Hot End Cooling Fans
Cool down filaments fast
2. Changeable Imported Titan Direct Drive
3. Meanwell 350W Power Supply
Generate Stable Electricity
4. Allmetal Extruding Kit
Sturdy and Wear-resisting
5. BL-Touch (auto-leveling function) can be added
6. Ultra quiet TMC2208 Motherboard
Silent printing, low decibel
7. Resume printing function
1. One Port Hot End Cooling Fan
Cool down filaments slower
2. Bowden-styled Extruder Only
3. 12V Ordinary Power Supply
4. Plastic Extruding Kit
Abrasive and not stable
5. Manual Leveling
Time and energy consuming
6. Normal Drive
7. No Power Resume
No Filament Sensor
The dual cooling fans of the Creality CR-10 v2 significantly improved the material supply. Thanks to the cooling, the material intake improves considerably. The two coolers significantly optimize cooling by 55%. This allows low temperatures of 30 ° C during filament transport. This improves the printing precision by 10%.
The stable V-profiles of the Creality CR-10 v2 ensure a stable frame. Due to the massive construction of the printhead runs vibration and quiet. This allows a very high 3D printing precision. Finished accurate components easily.
The TMC2208 motherboard works quietly and consistently reliable. 3D prints lasting up to 200 hours are possible. The noise level is below 50 dB.
The Creality CR-10 V2 has a reliable power supply from MeanWell. Thanks to its 350 W, it provides your 3D printer with sufficient power throughout. The power is enough to quickly heat the print bed to 100 ° C.
Should the power fail, this feature allows you to easily resume your 3D printing. The Creality CR-10 V2 remembers the position of your printhead. After the stream has returned, you can just continue printing. Save time, filament and money.
The filament sensor detects the filament status. In case of irregularities, your Creality CR-10 V2 will stop Additive Manufacturing. After you've checked and fixed them, you'll simply continue your 3D printing.
An optional upgrade using BL-Touch allows you to upgrade your Creality CR-10 V2 with the auto-leveling function. The BL-Touch measures the individual points on your build platform, the system stores the coordinates and then it compensates for the different distances between build platform and extruder head.
An additional support stabilizes the Creality CR-10 V2 again. This makes the basic construction very solid. This allows the printhead to run smoothly as it minimizes vibration.
|Printing speed||≤180mm/s,normal 30-60mm/s|
|Nozzle Diameter||Standard 0.4mm|
|Working Mode||online or SD slot offline printing|
|Slicing software||Cura\Repetier-Host\Simplify 3D|
|Power supply||AC Input 115V/230V Output:24V|