ColorFabb - XT Black - 750grs 2.85mm

Color is important for most 3d printing projects, which is why colorFabb decided to bring color to their XT line of filament! The XT-copolyester range, made with Eastman AmphoraTM 3D polymer, is now available in many vibrant colors. colorFabb have selected these colors carefully and are sure these will help create better looking XT-copolyester prints.

Our army of test Owls and Thumb screws in awesome Colorfabb colours!

Adviced 3d printing temperature:
240-260C

Adviced 3d print speed:
40 - 70 mm/s

Advised Heated bed
60-70C

Build platform
We advice to print on a heated bed. If you’re using aluminum of glass as the build plate we advice using glue stick to make sure the first layer sticks well and keeps the part from warping. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.

Material:
colorFabb XT-COPOLYESTER

Diameter Tolerance:
± 0.05 mm

Density: 
1.370 g/cm3

Glass Transition Temperature:
75C