Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Manufacturer: SparkFun
  2. Remove This Item Manufacturer: RoboBuilder

Shopping Options

Category
  1. Bitalino (1)
  2. Robobuilder (4)
  3. Sparkfun (2504)
Core type
  1. Quad Core (1)
  2. Single Core (1)
Filament Thickness
  1. 1.75 mm (1)
  2. 2.85 mm (1)
CPU
1GHz 1.2GHz 1GHz to 1.2GHz
Maximum build height
18 cm 25 cm 18 cm to 25 cm
RAM
512MB 1GB 512MB to 1GB
RAM type
  1. DDR2 (1)
  2. DDR3 (1)
Build Volume
4608 cc 19600 cc 4608 cc to 19600 cc
Printer Footprint
  1. Small (up to 200 x 200 mm) (1)
  2. Medium (up to 300 x 300 mm) (1)
Compatible Material
  1. ABS (2)
  2. Dissovable (2)
  3. Flexible (2)
  4. Nylon (2)
  5. PETG (2)
  6. PLA (2)
Price
£0 £17973 £0 to £17973
Manufacturer
  1. Carbide 3D (4)
  2. CH Robotics (1)
  3. Colorfabb (75)
  4. Creality (6)
  5. Dagu (44)
  6. DeWalt (5)
  7. DFRobot (26)
  8. Dobot (2)
  9. Double Robotics (6)
  10. eBox (6)
  11. Filkemp (3)
  12. Great Scott Gadgets (7)
  13. HobbyKing (6)
  14. Inventables (55)
  15. JtechPhotonics (8)
  16. littleBits (7)
  17. Makerbot (75)
  18. Monsterfil (56)
  19. NinjaFlex (1)
  20. NooElec (1)
  21. Opt Lasers (5)
  22. Pelican (2)
  23. plux | wireless biosignals (2)
  24. Printrbot (1)
  25. Roboard (3)
  26. RoboBuilder (4)
  27. RoboSavvy (16)
  28. RoboSavvy Labs (2)
  29. RoboSavvy Plastics (4)
  30. Robotis (268)
  31. SparkFun (2509)
  32. Trossen Robotics (19)
  33. Vectric (8)
Compare Products

You have no items to compare.

Brands

  1. Exc. VAT: £0.58 Inc. VAT: £0.70
    USB Type 'A' Male connector. Ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB AtoA extension cable.
  2. Exc. VAT: £12.08 Inc. VAT: £14.50
    The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can run at any voltage! That's right - power the board at 5V and the unit will convert RS232 to 5V TTL. Power the board at 2.8V and the Shifter board will convert RS232 to 2.8V CMOS TTL. Includes two indicator LEDs for TX and RX. Runs from 300bps up to 115200bps.
  3. Exc. VAT: £8.75 Inc. VAT: £10.50
    Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph. 5 meter cable terminated with standard male SMA connector.
  4. Exc. VAT: £1.08 Inc. VAT: £1.30
    This is a low-cost, basic SOIC breakout boards. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are easier to work with and integrate well with breadboards.
  5. Exc. VAT: £1.08 Inc. VAT: £1.30
    Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" headers.
  6. Exc. VAT: £1.08 Inc. VAT: £1.30
    8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine. Can be used with packages from 0.200" (5mm) up to 0.450" (11.4mm) in width.
  7. Exc. VAT: £1.08 Inc. VAT: £1.30
    8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine. Can be used with packages from 0.200" (5mm) up to 0.450" (11.4mm) in width.
  8. Exc. VAT: £1.08 Inc. VAT: £1.30
    8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We've made these 0.635mm devices fit just fine. Can be used with packages that have a lead span of .230" up to .350".
  9. Exc. VAT: £6.50 Inc. VAT: £7.80
    These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC Hook to IC Hook test leads. Comes with Black, Red, Blue, Green, and Yellow colored leads.
  10. Exc. VAT: £1.67 Inc. VAT: £2.00
    This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.