Dagu - 6DOF Robot Arm with Gripper and Controller. This 6DF robot arm is made from 3mm thick aluminium sheet and uses 4x 12Kg/cm metal geared TowerPro MG945 servos for the base and arm. 2x 1.8Kg/cm GWS STD micro servos operate the wrist and gripper. A serial interface and PC software is included.
Dagu - Mini Bot. Designed specifically for beginners and younger students this kit will teach all the basic skills needed for making and programming robots. The kit is Arduino compatible and allows you to create 2 different robots (one at a time).
Dagu - Rover 5 Robot Platform (2 motors + 2 encoders). The Rover 5 uses 2 independent motors, each with an optical quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels.
If you're looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with an optical quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels.
Designed originally for the Rover 5 chassis this driver PCB is ideal for any small robot
using either Omni or Mecanum wheels. Current sensing for each motor allows the
processor to determine if a motor has stalled or is under excessive load.
Dagu - 2DOF Robot Arm with Gripper and Servos (13cm). The robotic claw can bring life to any project. Using just gears and the servo, gripping, grabbing and even clamping objects can be easily implemented into your project. Made from strong 3mm sheet aluminium this 2 degree of freedom robotic arm with a gripper allows mobile robots to pick up and move objects.
The arm comes fully assembled, but needs a controller and power source.
Dagu - Micro Servo 8g 1.5kg.cm. This Micro Servo is ideal for Applications where Small Weight and Size are a key factor.
The Servo uses standard PWM control signals and operates from 4.8V - 6V with a power consumption of <500mA.