Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Manufacturer: Trossen Robotics
  2. Remove This Item Manufacturer: Inventables

Shopping Options

Category
  1. Inventables (52)
  2. Sparkfun (2)
  3. Trossen Robotics (19)
Stall Torque (N.m)
1.4 2.5 1.4 to 2.5
Depth (mm)
£35 £40 £35 to £40
Stall Current (A)
0.9 2.3 0.9 to 2.3
Max No Load Speed (rpm)
50 97 50 to 97
Weight (g)
£54 £77 £54 to £77
Use
  1. Engraving (13)
  2. General carving (16)
  3. PCB/circuit board (1)
  4. Routing (6)
  5. Three-dimensional contouring (6)
  6. V carving (7)
Cutting Material
  1. Aluminium (13)
  2. Corian (15)
  3. Linoleum (13)
  4. MDF (18)
  5. PCB/circuit board (1)
  6. Plastic (19)
  7. Plywood (18)
  8. Soft Metals (11)
  9. Wood (18)
Type
  1. Ball Nose (6)
  2. Downcut (9)
  3. Engraving (7)
  4. PCB/circuit board (6)
  5. Straight (8)
  6. Upcut (12)
  7. V bit (7)
  8. Variety pack (9)
Cutting Diameter
  1. 0.01 in (7)
  2. 1/16 in (8)
  3. 1/2 in (2)
  4. 1/32 in (7)
  5. 1/4 in (5)
  6. 1/8 in (15)
Shank Diameter
  1. 1/4 in (6.35mm) (5)
  2. 1/8 in (3.175mm) (22)
Flutes
  1. 1 (11)
  2. 2 (21)
  3. 3 (5)
Voltage (V)
10 12 10 to 12
Price
£0 £4023 £0 to £4023
Manufacturer
  1. Carbide 3D (4)
  2. CH Robotics (1)
  3. Colorfabb (75)
  4. Creality (6)
  5. Dagu (44)
  6. DeWalt (5)
  7. DFRobot (26)
  8. Dobot (2)
  9. Double Robotics (6)
  10. eBox (6)
  11. Filkemp (3)
  12. Great Scott Gadgets (7)
  13. HobbyKing (6)
  14. Inventables (54)
  15. JtechPhotonics (11)
  16. littleBits (7)
  17. Makerbot (57)
  18. Monsterfil (56)
  19. NinjaFlex (1)
  20. NooElec (1)
  21. Opt Lasers (5)
  22. Pelican (2)
  23. plux | wireless biosignals (2)
  24. Printrbot (1)
  25. Roboard (3)
  26. RoboBuilder (4)
  27. RoboSavvy (16)
  28. RoboSavvy Labs (2)
  29. RoboSavvy Plastics (4)
  30. Robotis (265)
  31. SparkFun (2509)
  32. Trossen Robotics (19)
  33. Vectric (8)
Compare Products

You have no items to compare.

Brands

  1. Exc. VAT: £2.42 Inc. VAT: £2.90
    Design custom (PCB) circuit boards with these FR1 machinable blanks. These circuit board blanks are made by bonding a thin layer of 1 ounce of copper over one or both sides of the entire substrate. To etch a circuit design into the material, unwanted copper can be removed using a CNCmachine, leaving only traces.
  2. Exc. VAT: £2.92 Inc. VAT: £3.50
    30 degree engraving bit for wood, plastic and linoleum. Best for Cutting plastics, woods, and soft materials like linoleum
  3. Exc. VAT: £3.00 Inc. VAT: £3.60
    Used with other fasteners to secure one object to another.
  4. Exc. VAT: £3.50 Inc. VAT: £4.20
    Inventables Solid Carbide Single Flute Upcut End Mill 1/8. The spiral upcut bits pull chips from the cutting surface upwards, leaving a flat bottomed pocket. This provides accurate cuts without chatter in the plastic because the chips are being evacuated away from the cutting edges. This bit is not recommended for wood because it pulls the wood fibers causing tear out.
  5. Exc. VAT: £3.83 Inc. VAT: £4.60
    This end mill has a 2 straight flutes. It works well for materials where the lifting affect of a spiral flute might cause unwanted results, like wood or things with thin laminates or veneers. Best for Cutting Corian, plastic, linoleum, wood, plywood, MDF
  6. Exc. VAT: £4.33 Inc. VAT: £5.20
    Sculpt beautiful 3D surfaces with this tool. Ball end mills are typically used to create smooth flowing 3D surfaces with CNC routers and mills. This solid carbide tool can easily mill woods, plastics and soft metals. Best for Cutting Plastics, woods, aluminum
  7. Exc. VAT: £5.00 Inc. VAT: £6.00
    Inserts into an aluminum extrusion. Provides mounting point to attach components.
  8. Exc. VAT: £5.25 Inc. VAT: £6.30

    Make your router compatible with smaller bits

    1/4" to 1/8" collet adapter (collet and nut not included)

  9. Exc. VAT: £5.50 Inc. VAT: £6.60
    Starting from: £5.94

    A kit comprised of two bearings, one precision shim washer, and one V wheel

  10. Exc. VAT: £5.58 Inc. VAT: £6.70

    6 Port 3pin AX/MX Power Hub

  11. Exc. VAT: £5.92 Inc. VAT: £7.10
    Starting from: £6.39

    Textured sheet with layers of contrasting colors ideal for engraving

    . This King ColorCore® unique 3 layer high-density polyethylene sheet is perfect for engraving. A layer of black HDPE is sandwiched between two 0.050″ layers of white, making it easy to expose different colors while engraving or milling.
  12. Exc. VAT: £5.92 Inc. VAT: £7.10
    Starting from: £6.39

    Textured sheet with layers of contrasting colors ideal for engraving.

    This King ColorCore® unique 3 layer high-density polyethylene sheet is perfect for engraving. A layer of black HDPE is sandwiched between two 0.050″ layers of white, making it easy to expose different colors while engraving or milling.
  13. Exc. VAT: £6.50 Inc. VAT: £7.80

    Makerslide spindle mounting plate

  14. Exc. VAT: £8.00 Inc. VAT: £9.60
    Use with a threaded rod to create linear motion
  15. Exc. VAT: £8.42 Inc. VAT: £10.10
    1/16 Solid Carbide Upcut Fish Tail Spiral
  16. Exc. VAT: £9.25 Inc. VAT: £11.10

    Ideal for carving plastics

    . These fishtail bits are great for fine detail and inlays. The upcut tip design creates a cleaner edge on the backside of the sheet when cutting through materials. The flute design works well with high speed spindles and high feedrates.
  17. Exc. VAT: £9.25 Inc. VAT: £11.10
    1/16 Solid Carbide Downcut Fish Tail Spiral Bit
  18. Exc. VAT: £10.08 Inc. VAT: £12.10
    Convert X-Carve 2015 to X-Carve 2016 eccentric spacers
  19. Exc. VAT: £12.00 Inc. VAT: £14.40
    1/8 Solid Carbide Downcut Fish Tail Spiral Bit
  20. Exc. VAT: £14.08 Inc. VAT: £16.90
    Necessary for tightening the DeWalt Precision Collet Nut.
  21. Exc. VAT: £14.08 Inc. VAT: £16.90
    Cut V shapes with your CNC or hand router
  22. Exc. VAT: £14.08 Inc. VAT: £16.90
    Cut V shapes with your CNC or hand router
  23. Exc. VAT: £14.17 Inc. VAT: £17.00
    1/32 Solid Carbide Upcut Fish Tail Spiral
  24. Exc. VAT: £14.17 Inc. VAT: £17.00
    1/32 Solid Carbide Downcut Fish Tail Spiral Bit
  25. Exc. VAT: £16.58 Inc. VAT: £19.90

    Additional parts for more versatile clamping

  26. Exc. VAT: £18.08 Inc. VAT: £21.70
    Cut V shapes with your CNC or hand router. V-bits are great for carving very intricate, detailed designs. When used in conjunction with v-carving software, they add depth and dimension that can’t be achieved with a flat bit.
  27. Exc. VAT: £18.08 Inc. VAT: £21.70
    Inventables V cut shapes with your CNC or hand router. V-bits are great for carving very intricate, detailed designs. When used in conjunction with v-carving software, they add depth and dimension that can’t be achieved with a flat bit. Our v-bits have an angle tolerance of +/- 1°. They do not have a flat tip tolerance.
  28. Exc. VAT: £20.58 Inc. VAT: £24.70
    Compression bits are great because they leave a nice finish on both the top and bottom side of your material. This is because they create both upward and downward force while cutting.
  29. Exc. VAT: £21.08 Inc. VAT: £25.30
    Drill the small holes in your fabricated circuit board
  30. Exc. VAT: £21.08 Inc. VAT: £25.30

    A balanced collet nut for your router

     

    Note: It requires an ER-16M collet wrench.

  31. Exc. VAT: £21.75 Inc. VAT: £26.10

    5 sheets of material for perfecting your carving skills

    . Whether you’re new to 3D carving, or just looking to fine-tune your skills, it’s always helpful to have material around for practice. This pack contains 5 sheets for testing out new techniques and designs. Each material has default settings in Easel, making it easy to try something new.
  32. Exc. VAT: £24.92 Inc. VAT: £29.90

    The PhantomX Parallel AX-12 Gripper is a simple and easy-to-build solution for roboticists looking to pick up small objects. The Parallel AX-12 Gripper is a simple parallel actuating manipulator; keeping size, weight, and cost to a minimum and making it perfect for simple applications.

  33. Exc. VAT: £25.17 Inc. VAT: £30.20

    A high precision tool holder for your Dewalt router

     

    Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.

  34. Exc. VAT: £25.17 Inc. VAT: £30.20

    A high precision tool holder for your Dewalt router

     

    Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.

  35. Exc. VAT: £28.17 Inc. VAT: £33.80
    A replacement waste board for your Carvey®. The waste board or spoil board is the main cutting surface of your Carvey. The relatively soft MDF provides a sacrificial surface that allows for easy through-cutting operations without having to worry about damaging tooling or your machine.
  36. Exc. VAT: £29.17 Inc. VAT: £35.00

    With the Z-Probe Kit you can automatically find the top of your material that you want to cut

  37. Exc. VAT: £30.00 Inc. VAT: £36.00
    This set of 6 bits is great for general purpose wood and plastic cutting.Best for cutting Corian, plastic, linoleum, wood, plywood, MDF.This bit set will get you started on your first or next wood/plastic based prject.
  38. Exc. VAT: £35.00 Inc. VAT: £42.00
    Spindle carriage for the Inventables X-Carve (hardware not included). This is a one piece extruded aluminum spindle carriage. It is designed for our 24VDC spindle, Quiet Cut or any 52mm diameter spindle. This is compatible with X-Carve and Shapeoko 2. The finish is bead blasted and black anodized aluminum. It does not come with hardware.
  39. Exc. VAT: £35.17 Inc. VAT: £42.20
    DeWalt D26200 Spindle Mount with a 1/4 to 1/8 Collet Adapter. This integrated spindle mount + z-axis carriage is a single sturdy piece of extruded aluminum designed for X-Carve (and Shapeoko 2). Securely mount your DeWalt 611 and enjoy the advantages of this powerful compact trim router- 1.25 horsepower, active speed control, and integrated LED downlighting.
  40. Exc. VAT: £35.17 Inc. VAT: £42.20
    6 bits great for cutting soft metals like aluminum. This set of 6 bits is great for general purpose soft metal cutting. Bits have a shank diameter of 1/8 inch. Up-cut bits expel the cut material upward and smooths the bottom of the cut pass. It pulls heat away from the bit, and is a good choice for plastics, metals, or other materials that are prone to melting or burning.
  41. Exc. VAT: £35.17 Inc. VAT: £42.20
    Control the speed of your DC spindle. This speed controller is specifically designed for use with our Quiet Cut, DC spindles. It will not work with the AC powered routers or rotary tools. The speed can be controlled with a potentiometer or an external PWMsource such as Mach3. We recommend 48VDC input for best performance with our Quiet Cut DC spindles.
  42. Exc. VAT: £35.17 Inc. VAT: £42.20

    The ArbotiX-M Robocontroller is at the heart of every Interbotix Robot. This versatile robot controller is an advanced control solution for BIOLOID and DYNAMIXEL based actuators. As an Arduino compatible microcontroller the Arbotix Robocontroller also benefits from a huge open source community of libraries and examples. Since its release in 2010 the Arbotix has quickly become a favorite among builders worldwide from hobby to high level research.

  43. Exc. VAT: £37.17 Inc. VAT: £44.60

    For use with Carvey or X-Carve

  44. Exc. VAT: £39.25 Inc. VAT: £47.10
    Provides power for your project
  45. Exc. VAT: £40.83 Inc. VAT: £49.00

    Arduino shield with 3 stepper motor drivers built in

  46. Exc. VAT: £45.00 Inc. VAT: £54.00
    This set of 8 bits is great for beginners who are just getting started, or anyone looking to do general purpose cutting. They all have 1/8" shanks.Pair this with our Practice Material Pack and get carving! Best for cutting Corian, plastic, linoleum, wood, plywood, MDF, aluminum
  47. Exc. VAT: £48.25 Inc. VAT: £57.90
    This set of 6 bits is great for achieving different levels of detail when engraving. Please note these bits have very fine, fragile tips and can break easily. They may need to be replaced often. All bits have a 1/8" shank.
  48. Exc. VAT: £49.25 Inc. VAT: £59.10
    This is a bi-polar (4 wire) stepper motor with a 1/4" (0.25") diameter shaft.
  49. Exc. VAT: £52.75 Inc. VAT: £63.30

    Arduino compatible, open-source XBEE-wireless hand-held controller

  50. Exc. VAT: £79.42 Inc. VAT: £95.30
    A tidy solution for securing your electronics. The new sideboard is a tidy solution for securing your X-Controller to your X-Carve. Complete with all the extrusions, brackets, and hardware you need.
  51. Exc. VAT: £118.83 Inc. VAT: £142.60
    60 colored tiles, perfect for your first project. This pack of 6″×6″ (aprox 15 x 15cm) tiles (qty 60) is designed as an easy kit for schools to use as a first project when bringing Carvey or X-Carve into the classroom. Students can make their own tiles as an introduction to designing in Easel, then complete their first carves. The teacher can help them put all of the finished tiles together into a large mosaic, showcasing the work to the rest of the school.
  52. Exc. VAT: £149.83 Inc. VAT: £179.80

    The X-Carve Dust Control System is designed to collect dust as the machine carves your work piece. It features a dust shoe that attaches to the X axis carriage. A grounded hose connects to the dust shoe and routes the work dust into your vacuum or dust collector.

  53. From: £149.92

    To: £294.09

    The PhantomX Robot Turret is a high performance Pan & Tilt platform for experimenters, roboticists, and hobbyists, making it easy to get started in the exciting field of physical computing! This easy to build kit is based around the exclusive ArbotiX Robocontroller and AX-12A & AX-18A Dynamixel Actuators.

  54. Exc. VAT: £209.92 Inc. VAT: £251.90
    Trossen Robotics - PhantomX Pincher Robot Arm Kit (NO SERVOS)
  55. £246.59

    The PhantomX Pincher AX-12 Robot Arm is a 4 degree-of-freedom robotic arm and an easy addition to the TurtleBot ROS robot platform. This hardware kit comes with everything needed to physically assemble and mount the arm as a standalone unit or as an addition to your Turtlebot Robot/mobile platform. 

  56. Exc. VAT: £295.92 Inc. VAT: £355.10
    WidowX MX-28 Robot Turret Kit (No Servos). The WidowX Robot Turret is a super high performance Pan & Tilt platform for experimenters, roboticists, and hobbyists, making it easy to get started in the exciting field of physical computing!
  57. From: £295.92

    To: £687.92

    The WidowX Robot Turret is a super high performance Pan & Tilt platform for experimenters, roboticists, and hobbyists, making it easy to get started in the exciting field of physical computing! This easy to build kit is based around the exclusive ArbotiX Robocontroller and the new MX-28T Dynamixel Actuators, granting it some serious payload and speed capabilities.

  58. £411.25
    Make your X-Carve stronger, smarter, and more reliable with this upgrade kit. Backwards-compatible with all X-Carve machines shipped before September 2016. The X-Carve upgrade kit is available in both 500mm and 1000mm sizes.
  59. Exc. VAT: £437.58 Inc. VAT: £525.10
    The PincherX 100 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  60. £465.17
    The PhantomX Reactor Robot Arm is the first in Interbotix Labs' offering of Arbotix based research grade robotic arms. The Reactor Arm was designed with reach and agility in mind, but it still boasts considerable strength for an arm of its size. The PhantomX Reactor Robot Arm was designed with entry-level research and university use in mind, providing one of the highest featured arms on the market today while not breaking one's budget.
  61. Exc. VAT: £743.92 Inc. VAT: £892.70
    The PincherX 150 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  62. From: £1,019.50

    To: £5,638.67

    Out of Stock

    Carbide 3D - Shapeoko Standard. The Shapeoko is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, hardwoods, and plastics.

    The Shapeoko is designed to be affordable enough for any shop and powerful enough to do real work. Don’t let the size intimidate you! This is an entry-level CNC machine designed for hobbyists, artists, and fabricators!

  63. Starting from:
    Exc. VAT: £1,121.92 £0.00

    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack

    Note: The extra waste-board provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  64. Exc. VAT: £1,134.33 Inc. VAT: £1,361.20
    The ReactorX 150 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  65. Starting from:
    Exc. VAT: £1,227.83 £1,292.45


    Waste-board out of stock. Estimated lead time 3 weeks. Waste-boards can be souced locally. Please contact us for more information. 


    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - 750mm Waste board
    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack
    • - X-Carve Dust Control System (1000mm)

    Note: The waste-boards provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  66. Starting from:
    Exc. VAT: £1,378.66 £0.00

    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - 1000mm Waste board
    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack
    • - X-Carve Dust Control System

    Note: The waste-boards provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  67. Exc. VAT: £1,396.92 Inc. VAT: £1,676.30
    The ReactorX 200 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  68. From: £1,593.00

    To: £6,112.17

    This is the Shapeoko XXL, nearly FOUR times the cutting area of the Shapeoko v3! That’s a lot of cutting area! The Shapeoko is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, hardwoods, and plastics.

  69. Exc. VAT: £1,922.08 Inc. VAT: £2,306.50
    The WidowX 200 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  70. Exc. VAT: £2,184.67 Inc. VAT: £2,621.60
    The WidowX 250 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  71. Exc. VAT: £2,202.42 Inc. VAT: £2,642.90

    A modular ROS-based robotics platform powered by the Intel® Joule™ 570x module and Intel® RealSense™ 3D Camera technologies from Interbotix Labs, in partnership the Open Source Robotics Foundation.

  72. Exc. VAT: £3,322.50 Inc. VAT: £3,987.00
    The ViperX 250 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.
  73. Exc. VAT: £4,022.75 Inc. VAT: £4,827.30
    The ViperX 300 Robot Arm belongs to a new family of arms from Interbotix featuring the DYNAMIXEL X-Series Smart Servo Motors. The X-Series actuators offer higher torque, more efficient heat dissipation and better durability all at a smaller form factor over previous DYNAMIXEL servos.