Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Manufacturer: DFRobot
  2. Remove This Item Manufacturer: Inventables

Shopping Options

Category
  1. DFRobot (26)
  2. Inventables (52)
  3. Sparkfun (2)
Max No Load Speed (rpm)
114 360 114 to 360
Weight (g)
£90 £270 £90 to £270
Use
  1. Engraving (13)
  2. General carving (16)
  3. PCB/circuit board (1)
  4. Routing (6)
  5. Three-dimensional contouring (6)
  6. V carving (7)
Width (mm)
£4 £36 £4 to £36
Height (mm)
£24 £42 £24 to £42
Stall Torque (N.m)
1 2.5 1 to 2.5
Depth (mm)
£51 £123 £51 to £123
Stall Current (A)
1.5 5.5 1.5 to 5.5
Cutting Material
  1. Aluminium (13)
  2. Corian (15)
  3. Linoleum (13)
  4. MDF (18)
  5. PCB/circuit board (1)
  6. Plastic (19)
  7. Plywood (18)
  8. Soft Metals (11)
  9. Wood (18)
Type
  1. Ball Nose (6)
  2. Downcut (9)
  3. Engraving (7)
  4. PCB/circuit board (6)
  5. Straight (8)
  6. Upcut (12)
  7. V bit (7)
  8. Variety pack (9)
Cutting Diameter
  1. 0.01 in (7)
  2. 1/16 in (8)
  3. 1/2 in (2)
  4. 1/32 in (7)
  5. 1/4 in (5)
  6. 1/8 in (15)
Shank Diameter
  1. 1/4 in (6.35mm) (5)
  2. 1/8 in (3.175mm) (22)
Flutes
  1. 1 (11)
  2. 2 (21)
  3. 3 (5)
Voltage (V)
3.3 12 3.3 to 12
Price
£0 £1593 £0 to £1593
Manufacturer
  1. Carbide 3D (4)
  2. CH Robotics (1)
  3. Colorfabb (75)
  4. Creality (6)
  5. Dagu (44)
  6. DeWalt (5)
  7. DFRobot (26)
  8. Dobot (2)
  9. Double Robotics (6)
  10. eBox (6)
  11. Filkemp (3)
  12. Great Scott Gadgets (7)
  13. HobbyKing (6)
  14. Inventables (54)
  15. JtechPhotonics (11)
  16. littleBits (7)
  17. Makerbot (57)
  18. Monsterfil (56)
  19. NinjaFlex (1)
  20. NooElec (1)
  21. Opt Lasers (5)
  22. Pelican (2)
  23. plux | wireless biosignals (2)
  24. Printrbot (1)
  25. Roboard (3)
  26. RoboBuilder (4)
  27. RoboSavvy (16)
  28. RoboSavvy Labs (2)
  29. RoboSavvy Plastics (4)
  30. Robotis (265)
  31. SparkFun (2509)
  32. Trossen Robotics (19)
  33. Vectric (8)
Compare Products

You have no items to compare.

Brands

  1. Exc. VAT: £2.42 Inc. VAT: £2.90
    Design custom (PCB) circuit boards with these FR1 machinable blanks. These circuit board blanks are made by bonding a thin layer of 1 ounce of copper over one or both sides of the entire substrate. To etch a circuit design into the material, unwanted copper can be removed using a CNCmachine, leaving only traces.
  2. Exc. VAT: £2.92 Inc. VAT: £3.50
    30 degree engraving bit for wood, plastic and linoleum. Best for Cutting plastics, woods, and soft materials like linoleum
  3. Exc. VAT: £3.00 Inc. VAT: £3.60
    Used with other fasteners to secure one object to another.
  4. Exc. VAT: £3.50 Inc. VAT: £4.20
    Inventables Solid Carbide Single Flute Upcut End Mill 1/8. The spiral upcut bits pull chips from the cutting surface upwards, leaving a flat bottomed pocket. This provides accurate cuts without chatter in the plastic because the chips are being evacuated away from the cutting edges. This bit is not recommended for wood because it pulls the wood fibers causing tear out.
  5. Exc. VAT: £3.83 Inc. VAT: £4.60
    This end mill has a 2 straight flutes. It works well for materials where the lifting affect of a spiral flute might cause unwanted results, like wood or things with thin laminates or veneers. Best for Cutting Corian, plastic, linoleum, wood, plywood, MDF
  6. Exc. VAT: £4.33 Inc. VAT: £5.20
    Sculpt beautiful 3D surfaces with this tool. Ball end mills are typically used to create smooth flowing 3D surfaces with CNC routers and mills. This solid carbide tool can easily mill woods, plastics and soft metals. Best for Cutting Plastics, woods, aluminum
  7. Exc. VAT: £5.00 Inc. VAT: £6.00
    Inserts into an aluminum extrusion. Provides mounting point to attach components.
  8. Exc. VAT: £5.25 Inc. VAT: £6.30

    Make your router compatible with smaller bits

    1/4" to 1/8" collet adapter (collet and nut not included)

  9. Exc. VAT: £5.50 Inc. VAT: £6.60
    Starting from: £5.94

    A kit comprised of two bearings, one precision shim washer, and one V wheel

  10. Exc. VAT: £5.92 Inc. VAT: £7.10
    Starting from: £6.39

    Textured sheet with layers of contrasting colors ideal for engraving

    . This King ColorCore® unique 3 layer high-density polyethylene sheet is perfect for engraving. A layer of black HDPE is sandwiched between two 0.050″ layers of white, making it easy to expose different colors while engraving or milling.
  11. Exc. VAT: £5.92 Inc. VAT: £7.10
    Starting from: £6.39

    Textured sheet with layers of contrasting colors ideal for engraving.

    This King ColorCore® unique 3 layer high-density polyethylene sheet is perfect for engraving. A layer of black HDPE is sandwiched between two 0.050″ layers of white, making it easy to expose different colors while engraving or milling.
  12. Exc. VAT: £6.50 Inc. VAT: £7.80

    Makerslide spindle mounting plate

  13. Exc. VAT: £8.00 Inc. VAT: £9.60
    Use with a threaded rod to create linear motion
  14. Exc. VAT: £8.42 Inc. VAT: £10.10
    1/16 Solid Carbide Upcut Fish Tail Spiral
  15. DFRobot - Relay Shield for Arduino V2.1 Sale
    Exc. VAT: £8.66 Inc. VAT: £10.39 £17.40

    This DFRoobot relay shield  V2.1 is a completely new desgin which  is capable of controlling 4 relays.  The max switching power could be DC 90W or AC 360VA. It could be directly controlled by Arduino/DFRduino through digital IOs with external 9v supply. With buildin xbee type socket, it can be wirelessly controlled via Xbee/bluetooth/WPM.  Make it an ideal solution for home automation and robotics purpose.
  16. Exc. VAT: £9.25 Inc. VAT: £11.10

    Ideal for carving plastics

    . These fishtail bits are great for fine detail and inlays. The upcut tip design creates a cleaner edge on the backside of the sheet when cutting through materials. The flute design works well with high speed spindles and high feedrates.
  17. Exc. VAT: £9.25 Inc. VAT: £11.10
    1/16 Solid Carbide Downcut Fish Tail Spiral Bit
  18. Exc. VAT: £10.08 Inc. VAT: £12.10
    Convert X-Carve 2015 to X-Carve 2016 eccentric spacers
  19. DFRobot - Flyduino-A 12 Servo Controller (Arduino Compatible) Sale
    Exc. VAT: £11.55 Inc. VAT: £13.86 £21.10

    This is probably the smallest Arduino controller speically designed for controlling the servo. It features a 12 standard servo control capbility with Xbee socket which can be used to control helicopter or UAV via the Xbee link. The feather weight (7.5g) make it an ideal controller for those application that has limited payload. The build in regulator is allow the input voltage vary from 3.5-8V which fits the most power supply without any modification.
  20. Exc. VAT: £11.92 Inc. VAT: £14.30
    DFRobot I2C 16x2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color.
  21. Exc. VAT: £12.00 Inc. VAT: £14.40
    1/8 Solid Carbide Downcut Fish Tail Spiral Bit
  22. Exc. VAT: £14.08 Inc. VAT: £16.90
    Necessary for tightening the DeWalt Precision Collet Nut.
  23. Exc. VAT: £14.08 Inc. VAT: £16.90
    Cut V shapes with your CNC or hand router
  24. Exc. VAT: £14.08 Inc. VAT: £16.90
    Cut V shapes with your CNC or hand router
  25. Exc. VAT: £14.17 Inc. VAT: £17.00
    1/32 Solid Carbide Upcut Fish Tail Spiral
  26. Exc. VAT: £14.17 Inc. VAT: £17.00
    1/32 Solid Carbide Downcut Fish Tail Spiral Bit
  27. Exc. VAT: £16.25 Inc. VAT: £19.50
    Brushless DC Motor with Encoder 12V 159RPM. This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor to be controlled easily. This product is convenient for mobile robotic platform since there is less drive pin and less MCU resource consumption.
  28. Exc. VAT: £16.58 Inc. VAT: £19.90

    Additional parts for more versatile clamping

  29. Exc. VAT: £18.08 Inc. VAT: £21.70
    Cut V shapes with your CNC or hand router. V-bits are great for carving very intricate, detailed designs. When used in conjunction with v-carving software, they add depth and dimension that can’t be achieved with a flat bit.
  30. Exc. VAT: £18.08 Inc. VAT: £21.70
    Inventables V cut shapes with your CNC or hand router. V-bits are great for carving very intricate, detailed designs. When used in conjunction with v-carving software, they add depth and dimension that can’t be achieved with a flat bit. Our v-bits have an angle tolerance of +/- 1°. They do not have a flat tip tolerance.
  31. Exc. VAT: £20.58 Inc. VAT: £24.70
    Compression bits are great because they leave a nice finish on both the top and bottom side of your material. This is because they create both upward and downward force while cutting.
  32. Exc. VAT: £21.08 Inc. VAT: £25.30
    Drill the small holes in your fabricated circuit board
  33. Exc. VAT: £21.08 Inc. VAT: £25.30

    A balanced collet nut for your router

     

    Note: It requires an ER-16M collet wrench.

  34. Exc. VAT: £21.75 Inc. VAT: £26.10

    5 sheets of material for perfecting your carving skills

    . Whether you’re new to 3D carving, or just looking to fine-tune your skills, it’s always helpful to have material around for practice. This pack contains 5 sheets for testing out new techniques and designs. Each material has default settings in Easel, making it easy to try something new.
  35. Exc. VAT: £24.58 Inc. VAT: £29.50
    This LCD4884 Shield provides 48x48 display. If your project need more information to display, this LCD shield can apparently meet your needs. It is able to display English, Chines, even images. It also integrates a 5 DOF joystick. The shield has 6 Digital IO and 5 Analog IO.
  36. Exc. VAT: £25.00 Inc. VAT: £30.00

    This is a GPRS / GSM Arduino expansion board developed by DFRobot. The capabilities of GPRS, DTMF, TTS speech all in one shield, operating frequency is EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz.

    It also supports UCS2 encoding data and text data format directly which makes your robot could do TTS voice broadcast at any time. It supports DTMF, once the DTMF feature was enabled, press the keys during a call can be converted into character, and can be used for remote control.

  37. Exc. VAT: £25.17 Inc. VAT: £30.20

    A high precision tool holder for your Dewalt router

     

    Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.

  38. Exc. VAT: £25.17 Inc. VAT: £30.20

    A high precision tool holder for your Dewalt router

     

    Note: This collet is not compatible with the standard DeWalt collet nut, it requires a Precision Collet Nut.

  39. Exc. VAT: £25.50 Inc. VAT: £30.60
    12V DC Motor 350RPM w/Encoder (12kg*cm). This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round.
  40. Exc. VAT: £26.42 Inc. VAT: £31.70
    Veyron Servo Driver (24-Channel) is a multiple servo controller, especially designed for humanoid robots, spider robots, robotic arms, and many other likewise applications. The controller integrates wireless data transmission interface, which is fully compatible with DFRobot Bluetooth module, APC220 wireless data transmission module and Xbee module.
  41. Exc. VAT: £27.67 Inc. VAT: £33.20
    DFRobot - XBoard V2 - A bridge between Home and Internet (Arduino Compatible)
  42. Exc. VAT: £28.17 Inc. VAT: £33.80
    A replacement waste board for your Carvey®. The waste board or spoil board is the main cutting surface of your Carvey. The relatively soft MDF provides a sacrificial surface that allows for easy through-cutting operations without having to worry about damaging tooling or your machine.
  43. Exc. VAT: £28.92 Inc. VAT: £34.70
    The DFRduino Ethernet Shield V2 is finally released. This new version supports Mega both 1280 and 2560. And it supports SD card read/write as well. The ethernet shield is fully functional now.
  44. Exc. VAT: £29.17 Inc. VAT: £35.00

    With the Z-Probe Kit you can automatically find the top of your material that you want to cut

  45. Exc. VAT: £30.00 Inc. VAT: £36.00
    This set of 6 bits is great for general purpose wood and plastic cutting.Best for cutting Corian, plastic, linoleum, wood, plywood, MDF.This bit set will get you started on your first or next wood/plastic based prject.
  46. Exc. VAT: £31.42 Inc. VAT: £37.70
    This is the upgraded DFRduino Mega 2560 V3.0 which is now fully compatible with Arduino Mega 2560 R3.
  47. Exc. VAT: £33.33 Inc. VAT: £40.00
    This robot gripper is perfect for all your gripping needs. Made from a heavy duty but lightweight PVC, it comes with four standard M4 thread holes on the bottom for easy assembly.
  48. Exc. VAT: £33.33 Inc. VAT: £40.00
    Bipolar Stepper Motor with Planet Gear Box (18kg.cm). This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.6 A at 2.78 V, allowing for a holding torque of 18kg-cm (176N-cm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length.
  49. Exc. VAT: £35.00 Inc. VAT: £42.00
    Spindle carriage for the Inventables X-Carve (hardware not included). This is a one piece extruded aluminum spindle carriage. It is designed for our 24VDC spindle, Quiet Cut or any 52mm diameter spindle. This is compatible with X-Carve and Shapeoko 2. The finish is bead blasted and black anodized aluminum. It does not come with hardware.
  50. Exc. VAT: £35.17 Inc. VAT: £42.20
    This is a very affordable 24Mhz 8 Channel USB Logic analyzer, ideal for testing your Arduino or other hobbyist microcontroller's communications.
  51. Exc. VAT: £35.17 Inc. VAT: £42.20
    Introduction
  52. Exc. VAT: £35.17 Inc. VAT: £42.20
    DeWalt D26200 Spindle Mount with a 1/4 to 1/8 Collet Adapter. This integrated spindle mount + z-axis carriage is a single sturdy piece of extruded aluminum designed for X-Carve (and Shapeoko 2). Securely mount your DeWalt 611 and enjoy the advantages of this powerful compact trim router- 1.25 horsepower, active speed control, and integrated LED downlighting.
  53. Exc. VAT: £35.17 Inc. VAT: £42.20
    6 bits great for cutting soft metals like aluminum. This set of 6 bits is great for general purpose soft metal cutting. Bits have a shank diameter of 1/8 inch. Up-cut bits expel the cut material upward and smooths the bottom of the cut pass. It pulls heat away from the bit, and is a good choice for plastics, metals, or other materials that are prone to melting or burning.
  54. Exc. VAT: £35.17 Inc. VAT: £42.20
    Control the speed of your DC spindle. This speed controller is specifically designed for use with our Quiet Cut, DC spindles. It will not work with the AC powered routers or rotary tools. The speed can be controlled with a potentiometer or an external PWMsource such as Mach3. We recommend 48VDC input for best performance with our Quiet Cut DC spindles.
  55. Exc. VAT: £37.17 Inc. VAT: £44.60

    For use with Carvey or X-Carve

  56. Exc. VAT: £39.25 Inc. VAT: £47.10
    Provides power for your project
  57. Exc. VAT: £39.92 Inc. VAT: £47.90
    Introduction  
  58. Exc. VAT: £40.83 Inc. VAT: £49.00

    Arduino shield with 3 stepper motor drivers built in

  59. Exc. VAT: £44.00 Inc. VAT: £52.80
    Starting from: £47.52

    The latest v3.0 kit comes with more useful components, more handy projects and higher quality parts. And most importantly, still the same price.

  60. Exc. VAT: £44.92 Inc. VAT: £53.90
    This DC Motor Driver can be used in 4WD mobile robot platforms, combat robots, smart car competition, drive pumps, electric fans, conveyors, etc...
  61. Exc. VAT: £45.00 Inc. VAT: £54.00
    This set of 8 bits is great for beginners who are just getting started, or anyone looking to do general purpose cutting. They all have 1/8" shanks.Pair this with our Practice Material Pack and get carving! Best for cutting Corian, plastic, linoleum, wood, plywood, MDF, aluminum
  62. Exc. VAT: £48.25 Inc. VAT: £57.90
    This set of 6 bits is great for achieving different levels of detail when engraving. Please note these bits have very fine, fragile tips and can break easily. They may need to be replaced often. All bits have a 1/8" shank.
  63. Exc. VAT: £49.25 Inc. VAT: £59.10
    This is a bi-polar (4 wire) stepper motor with a 1/4" (0.25") diameter shaft.
  64. Exc. VAT: £52.75 Inc. VAT: £63.30

    DFRobot - Wirele

  65. Exc. VAT: £56.42 Inc. VAT: £67.70
    The Devastator uses high strength aluminum alloy which makes it extremely solid and durable. The high speedmotors and premium tracks also allows it to move swiftly everywhere. Whatsmore, it benefits from a high performance suspension and enjoys an outstanding mobility across even the toughest terrains.
  66. Exc. VAT: £57.50 Inc. VAT: £69.00
    BOXZ is is an open source robot platform for DIY interactive entertainment! It combines Arduino, Origami and Robotics together, is easy to assemble, and also super fun to play with. The LEGO-like assembly manual will guide you through the entire process, and you will be able to control it with your phone or tablet! The skin is customizable so that you can create your own character robot. Now let's start a football match, a racing game, a battle or other interesting games with BOXZ!
  67. Exc. VAT: £61.58 Inc. VAT: £73.90

    This is a 4.3-inch e-ink display module, supports a maximum resolution of 800x600, using serial communication, built-in Chinese and English fonts. It also supports low power consumption mode. If you don't want to know the complex working theory of E-ink screen, or the algorithms of graphics, text, and pictures, it will be your best choice. You only need a serial port to implement all features, let it go! Unleash your creative potential.

  68. Exc. VAT: £72.25 Inc. VAT: £86.70

    The DFRobot 4WD mobile Platform is intended for use with the DFRobot ROMEO All-in-one Controller and includes 4x motors, 4x wheels and a complete chassis with mounting hardware. The included second level allows you to add more electronics and define a modular layout. The rectangular hole allows for a servo to be attached and be used for several purposes like a movable camera or a robotic arm. The high-strength aluminum alloy body material provides flexibility in rapid movement particularly in outdoor grass, gravel, sand or sloped surface. Increased life span of the electronics and gears due to the chasis study structure. The 4WD Arduino Mobile Platform is also suitable for robot competitions and research related projects.

  69. Exc. VAT: £79.42 Inc. VAT: £95.30
    A tidy solution for securing your electronics. The new sideboard is a tidy solution for securing your X-Controller to your X-Carve. Complete with all the extrusions, brackets, and hardware you need.
  70. Exc. VAT: £99.17 Inc. VAT: £119.00
    Rubber Wheel & Motor Kit. This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round.
  71. Exc. VAT: £99.33 Inc. VAT: £119.20
    Explore the physical world with MiniQ robot! This is a MinQ 2WD Plus which is based on our MiniQ 2WD Chasis. To make it suitable for educational, competions and fun to play with, we also added extra modules such as Romeo V2 All-in-one controller, Sharp GP2Y0A21 Distance Sensor and 9g micro servo into this kit. What makes it different from the original miniQ robots is that it comes with an upper deck, which allow you to install sensors, servos and even do some prototypings.
  72. Exc. VAT: £118.83 Inc. VAT: £142.60
    60 colored tiles, perfect for your first project. This pack of 6″×6″ (aprox 15 x 15cm) tiles (qty 60) is designed as an easy kit for schools to use as a first project when bringing Carvey or X-Carve into the classroom. Students can make their own tiles as an introduction to designing in Easel, then complete their first carves. The teacher can help them put all of the finished tiles together into a large mosaic, showcasing the work to the rest of the school.
  73. Exc. VAT: £149.83 Inc. VAT: £179.80

    The X-Carve Dust Control System is designed to collect dust as the machine carves your work piece. It features a dust shoe that attaches to the X axis carriage. A grounded hose connects to the dust shoe and routes the work dust into your vacuum or dust collector.

  74. Exc. VAT: £187.25 Inc. VAT: £224.70

    The RoboPeak RPLIDAR A1M8 is a new affordable LIDAR system for everyone. RPLIDAR is a low cost 360 degree 2D scanner (LIDAR) solution developed by the RoboPeak team. It performs the 360 lser scan with more than 6 metres of detection range. The 2D point cloud data taken from the scan can be used in mapping, localization (SLAM) and object/environment modeling.

  75. £411.25
    Make your X-Carve stronger, smarter, and more reliable with this upgrade kit. Backwards-compatible with all X-Carve machines shipped before September 2016. The X-Carve upgrade kit is available in both 500mm and 1000mm sizes.
  76. From: £1,019.50

    To: £5,638.67

    Out of Stock

    Carbide 3D - Shapeoko Standard. The Shapeoko is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, hardwoods, and plastics.

    The Shapeoko is designed to be affordable enough for any shop and powerful enough to do real work. Don’t let the size intimidate you! This is an entry-level CNC machine designed for hobbyists, artists, and fabricators!

  77. Starting from:
    Exc. VAT: £1,121.92 £0.00

    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack

    Note: The extra waste-board provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  78. Starting from:
    Exc. VAT: £1,227.83 £1,292.45


    Waste-board out of stock. Estimated lead time 3 weeks. Waste-boards can be souced locally. Please contact us for more information. 


    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - 750mm Waste board
    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack
    • - X-Carve Dust Control System (1000mm)

    Note: The waste-boards provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  79. Starting from:
    Exc. VAT: £1,378.66 £0.00

    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - 1000mm Waste board
    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack
    • - X-Carve Dust Control System

    Note: The waste-boards provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  80. From: £1,593.00

    To: £6,112.17

    This is the Shapeoko XXL, nearly FOUR times the cutting area of the Shapeoko v3! That’s a lot of cutting area! The Shapeoko is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, hardwoods, and plastics.