Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Cutting Material: Plastic
  2. Remove This Item Cutting Material: Soft Metals

Shopping Options

Category
  1. Carbide 3D (3)
  2. Inventables (16)
Use
  1. Engraving (9)
  2. General carving (12)
  3. Routing (5)
  4. Three-dimensional contouring (5)
  5. V carving (6)
Cutting Material
  1. Aluminium (12)
  2. Corian (14)
  3. Linoleum (12)
  4. MDF (17)
  5. PCB/circuit board (1)
  6. Plastic (18)
  7. Plywood (17)
  8. Soft Metals (10)
  9. Wood (17)
Type
  1. Ball Nose (5)
  2. Downcut (5)
  3. Engraving (6)
  4. PCB/circuit board (5)
  5. Straight (7)
  6. Upcut (11)
  7. V bit (6)
  8. Variety pack (8)
Cutting Diameter
  1. 0.01 in (6)
  2. 1/16 in (7)
  3. 1/2 in (2)
  4. 1/32 in (6)
  5. 1/4 in (3)
  6. 1/8 in (11)
Shank Diameter
  1. 1/4 in (6.35mm) (3)
  2. 1/8 in (3.175mm) (17)
Flutes
  1. 1 (10)
  2. 2 (17)
  3. 3 (4)
Price
£0 £1693 £0 to £1693
Manufacturer
  1. Carbide 3D (3)
  2. DeWalt (4)
  3. Inventables (19)
  4. JtechPhotonics (4)
  5. Opt Lasers (3)
  6. RoboSavvy (4)
  7. Vectric (4)
Compare Products

You have no items to compare.

Brands

  1. From: £1,482.92

    To: £5,183.92

    The Shapeoko XL comes with everything you need to make accurate parts from wood, plastic, and aluminum.

    We're also including our new Sweepy Dust Boot with every Shapeoko.

    If you're running a Makita, pick the 65mm. If you're running a DeWalt, pick the 69mm.

  2. From: £1,692.72

    To: £6,099.97

    The Shapeoko XXL comes with everything you need to make accurate parts from wood, plastic, and aluminum.

    We're also including our new Sweepy Dust Boot with every Shapeoko.

    If you're running a Makita, pick the 65mm. If you're running a DeWalt, pick the 69mm.

  3. From: £1,216.88

    To: £5,579.13

    The Shapeoko 3 comes with everything you need to make accurate parts from wood, plastic, and aluminum.

    We're also including our new Sweepy Dust Boot with every Shapeoko.

    If you're running a Makita, pick the 65mm. If you're running a DeWalt, pick the 69mm.

  4. Exc. VAT: £32.92 Inc. VAT: £39.50
    6 bits great for cutting soft metals like aluminum. This set of 6 bits is great for general purpose soft metal cutting. Bits have a shank diameter of 1/8 inch. Up-cut bits expel the cut material upward and smooths the bottom of the cut pass. It pulls heat away from the bit, and is a good choice for plastics, metals, or other materials that are prone to melting or burning.
  5. Starting from:
    Exc. VAT: £1,390.49

    *Limited Stock Available*

    Turn your workshop into a custom factory with X-Carve, a 3d carving machine kit. Paired with Easel, our free web-based software, you can carve complex designs in wood, plastic, soft metal, and more.


    EASEL Pro 1yr subscription included

    Just want to get carving?

    Select the following from the list below and you'll be ready to carve:

    • - 1000mm Waste board (no Grid or Logo)
    • - DeWalt D26200
    • - DeWalt D26200 Spindle Mount
    • - Carving Bit Super Pack
    • - X-Carve Dust Control System

    Note: The waste-boards provided do not include the silkscreen and are sourced locally since it is not cost effective to have them shipped from Inventables in the US due to their weight and size. The only differences are that the local version has a thickness of ​18mm instead of 19.05mm (3/4") and does not include the silkscreen. 

  6. Exc. VAT: £7.83 Inc. VAT: £9.40
    1/16 Solid Carbide Upcut Fish Tail Spiral
  7. Exc. VAT: £13.25 Inc. VAT: £15.90
    1/32 Solid Carbide Upcut Fish Tail Spiral
  8. Exc. VAT: £8.67 Inc. VAT: £10.40

    Ideal for carving plastics

    . These fishtail bits are great for fine detail and inlays. The upcut tip design creates a cleaner edge on the backside of the sheet when cutting through materials. The flute design works well with high speed spindles and high feedrates.
  9. Exc. VAT: £2.83 Inc. VAT: £3.40
    30 degree engraving bit for wood, plastic and linoleum. Best for Cutting plastics, woods, and soft materials like linoleum
  10. Exc. VAT: £3.25 Inc. VAT: £3.90
    Inventables Solid Carbide Single Flute Upcut End Mill 1/8. The spiral upcut bits pull chips from the cutting surface upwards, leaving a flat bottomed pocket. This provides accurate cuts without chatter in the plastic because the chips are being evacuated away from the cutting edges. This bit is not recommended for wood because it pulls the wood fibers causing tear out.
  11. Exc. VAT: £45.00 Inc. VAT: £54.00
    This set of 8 bits is great for beginners who are just getting started, or anyone looking to do general purpose cutting. They all have 1/8" shanks.Pair this with our Practice Material Pack and get carving! Best for cutting Corian, plastic, linoleum, wood, plywood, MDF, aluminum
  12. Exc. VAT: £30.00 Inc. VAT: £36.00
    This set of 6 bits is great for general purpose wood and plastic cutting.Best for cutting Corian, plastic, linoleum, wood, plywood, MDF.This bit set will get you started on your first or next wood/plastic based prject.
  13. Exc. VAT: £45.08 Inc. VAT: £54.10
    This set of 6 bits is great for achieving different levels of detail when engraving. Please note these bits have very fine, fragile tips and can break easily. They may need to be replaced often. All bits have a 1/8" shank.
  14. Exc. VAT: £4.08 Inc. VAT: £4.90
    Sculpt beautiful 3D surfaces with this tool. Ball end mills are typically used to create smooth flowing 3D surfaces with CNC routers and mills. This solid carbide tool can easily mill woods, plastics and soft metals. Best for Cutting Plastics, woods, aluminum
  15. Exc. VAT: £3.58 Inc. VAT: £4.30
    This end mill has a 2 straight flutes. It works well for materials where the lifting affect of a spiral flute might cause unwanted results, like wood or things with thin laminates or veneers. Best for Cutting Corian, plastic, linoleum, wood, plywood, MDF
  16. Exc. VAT: £13.17 Inc. VAT: £15.80
    Cut V shapes with your CNC or hand router
  17. Exc. VAT: £13.17 Inc. VAT: £15.80
    Cut V shapes with your CNC or hand router
  18. Exc. VAT: £16.92 Inc. VAT: £20.30
    Cut V shapes with your CNC or hand router. V-bits are great for carving very intricate, detailed designs. When used in conjunction with v-carving software, they add depth and dimension that can’t be achieved with a flat bit.
  19. Exc. VAT: £16.92 Inc. VAT: £20.30
    Inventables V cut shapes with your CNC or hand router. V-bits are great for carving very intricate, detailed designs. When used in conjunction with v-carving software, they add depth and dimension that can’t be achieved with a flat bit. Our v-bits have an angle tolerance of +/- 1°. They do not have a flat tip tolerance.