Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Cutting Material: Aluminium
  2. Remove This Item Cutting Material: Linoleum
  3. Remove This Item Manufacturer: DFRobot
  4. Remove This Item Manufacturer: Inventables

Shopping Options

Category
  1. Inventables (13)
  2. Sparkfun (2)
Use
  1. Engraving (10)
  2. General carving (12)
  3. Routing (5)
  4. Three-dimensional contouring (6)
  5. V carving (3)
Cutting Material
  1. Aluminium (13)
  2. Corian (15)
  3. Linoleum (13)
  4. MDF (18)
  5. PCB/circuit board (1)
  6. Plastic (19)
  7. Plywood (18)
  8. Soft Metals (11)
  9. Wood (18)
Type
  1. Ball Nose (6)
  2. Downcut (6)
  3. Engraving (7)
  4. PCB/circuit board (6)
  5. Straight (7)
  6. Upcut (11)
  7. V bit (3)
  8. Variety pack (8)
Cutting Diameter
  1. 0.01 in (7)
  2. 1/16 in (8)
  3. 1/32 in (7)
  4. 1/4 in (3)
  5. 1/8 in (11)
Shank Diameter
  1. 1/4 in (6.35mm) (3)
  2. 1/8 in (3.175mm) (15)
Flutes
  1. 1 (10)
  2. 2 (13)
  3. 3 (5)
Price
£0 £1546 £0 to £1546
Manufacturer
  1. Carbide 3D (2)
  2. DeWalt (5)
  3. DFRobot (0)
  4. Inventables (15)
  5. JtechPhotonics (5)
  6. Opt Lasers (5)
  7. RoboSavvy (5)
  8. Vectric (5)
Compare Products

You have no items to compare.

Brands

  1. Exc. VAT: £2.92 Inc. VAT: £3.50
    30 degree engraving bit for wood, plastic and linoleum. Best for Cutting plastics, woods, and soft materials like linoleum
  2. Exc. VAT: £3.33 Inc. VAT: £4.00
    Inventables Solid Carbide Single Flute Upcut End Mill 1/8. The spiral upcut bits pull chips from the cutting surface upwards, leaving a flat bottomed pocket. This provides accurate cuts without chatter in the plastic because the chips are being evacuated away from the cutting edges. This bit is not recommended for wood because it pulls the wood fibers causing tear out.
  3. Exc. VAT: £3.58 Inc. VAT: £4.30
    This end mill has a 2 straight flutes. It works well for materials where the lifting affect of a spiral flute might cause unwanted results, like wood or things with thin laminates or veneers. Best for Cutting Corian, plastic, linoleum, wood, plywood, MDF
  4. Exc. VAT: £4.17 Inc. VAT: £5.00
    Sculpt beautiful 3D surfaces with this tool. Ball end mills are typically used to create smooth flowing 3D surfaces with CNC routers and mills. This solid carbide tool can easily mill woods, plastics and soft metals. Best for Cutting Plastics, woods, aluminum
  5. Exc. VAT: £8.00 Inc. VAT: £9.60
    1/16 Solid Carbide Upcut Fish Tail Spiral
  6. Exc. VAT: £8.83 Inc. VAT: £10.60

    Ideal for carving plastics

    . These fishtail bits are great for fine detail and inlays. The upcut tip design creates a cleaner edge on the backside of the sheet when cutting through materials. The flute design works well with high speed spindles and high feedrates.
  7. Exc. VAT: £13.42 Inc. VAT: £16.10
    1/32 Solid Carbide Upcut Fish Tail Spiral
  8. Exc. VAT: £33.42 Inc. VAT: £40.10
    6 bits great for cutting soft metals like aluminum. This set of 6 bits is great for general purpose soft metal cutting. Bits have a shank diameter of 1/8 inch. Up-cut bits expel the cut material upward and smooths the bottom of the cut pass. It pulls heat away from the bit, and is a good choice for plastics, metals, or other materials that are prone to melting or burning.
  9. Exc. VAT: £45.00 Inc. VAT: £54.00
    This set of 8 bits is great for beginners who are just getting started, or anyone looking to do general purpose cutting. They all have 1/8" shanks.Pair this with our Practice Material Pack and get carving! Best for cutting Corian, plastic, linoleum, wood, plywood, MDF, aluminum
  10. Exc. VAT: £45.83 Inc. VAT: £55.00
    This set of 6 bits is great for achieving different levels of detail when engraving. Please note these bits have very fine, fragile tips and can break easily. They may need to be replaced often. All bits have a 1/8" shank.