Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Category: Brands

Shopping Options

Category
  1. Sparkfun (174)
  2. Bare Conductive (2)
  3. pi-top (2)
  4. Pycom (1)
  5. Qwiic (1)
  6. Chibitronics (1)
Price
£0 £278 £0 to £278
Manufacturer
  1. Carbide 3D (1)
  2. SparkFun (181)
Compare Products

You have no items to compare.

Sparkfun

SparkfunWe are one of the first Authorised Sparkfun Distributor in the UK. As SparkFun UK distributors we stock a huge range of SparkFun items – boards; modules; individual components; kits; and of course development boards including the Arduino, the Netduino and the SparkFun Redboard. Simply choose your desired development platform and let your imagination run wild!

Do you need advice on how to use a SparkFun product? Give us a call or email us and we will spend time with you on the phone to check what best suits your needs.

Our catalog is syncronized every day with the SparkFun website data, if there's a new product in the SparkFun website it will automatically be added to our store.

As SparkFun has a huge catalog we are not able to keep everything in stock. On each SparkFun item that's not in stock, there's a message saying when our next order with them will be placed and, if you can wait,just place an order and it will be included in our next order from the USA.

 

We are currently ordering from SparkFun every 3 weeks however this time frame can be shortened if we have more orders for SparkFun products; the more you order, the less time you may need to wait for your items.

  1. Exc. VAT: £3.83 Inc. VAT: £4.60
    The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not be confused with I2C) audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the I2S standard to an analog signal and amplifies the signal using a class D amplifier which can deliver up to 3.2W of power into a 4Ω load. The board can be configured to output only the left channel audio, right channel, or both.
  2. Exc. VAT: £26.00 Inc. VAT: £31.20
    The pi-topSPEAKER allows you to turn up the volume on your pi-top or pi-topCEED. This audio board provides a simple way to incorporate sound to your pi-top. Simply mount the pi-topSPEAKER to the modular rail inside of your pi-top and connect it via the 34-pin GPIO on the internal HUB Board, which can be daisy chained with other add-on boards.
  3. Exc. VAT: £9.25 Inc. VAT: £11.10
    An essential companion to the Chibi Chip, the Chibi Clip Mounting Accessory enables rapid testing and re-use of the microcontroller board without any headache. With the Chibi Clip, attaching (and detaching) your Chip to circuits built on paper is as easy as using a clothespin.
  4. Exc. VAT: £5.75 Inc. VAT: £6.90
    Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver. This board breaks out Texas Instruments' DRV2605L Haptic Motor Driver, which adds meaningful feedback from your devices using the breakout and an Arduino-compatible device.
  5. Exc. VAT: £1.08 Inc. VAT: £1.30
    The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.
  6. Exc. VAT: £3.83 Inc. VAT: £4.60
    The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
  7. Exc. VAT: £4.33 Inc. VAT: £5.20
    The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Due to popular demand, this version of the SparkFun Motor Driver includes pre-soldered male headers for ease of use. With the headers already soldered on, you can jump right in to using this little board without any assembly!
  8. Exc. VAT: £3.83 Inc. VAT: £4.60
    The SparkFun Lumenati 90L is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position that has been designed to give your projects an edge in their lighting capacity. The 90L board has been specifically designed to be daisy-chained with other Lumenati boards, thanks to the castellated edge connectors at each end allowing for multiple design options and formations. Additionally, we have labeled the APA102C LEDs on each board with numbers indicating their position in the sequence to help you write code more easily. We especially love using the Lumenati boards to give our flying race drones a bit of style and panache.
  9. Exc. VAT: £5.75 Inc. VAT: £6.90
    Designed to give your projects an edge in their lighting capacity, the SparkFun Lumenati 3x3 is a small, rectangular board equipped with nine APA102C LEDs arranged in a 3x3 array. The 3x3 board can be daisy-chained with other Lumenati boards, allowing for multiple design options and formations. With the equipped 0.1" spaced pins, this Lumenati can also be installed into a breadboard for more prototyping applications. Additionally, we have labeled the APA102C LEDs on each board with numbers indicating their position in the sequence to help you write code more easily. We especially love using the Lumenati boards to give our flying race drones a bit of style and panache.
  10. Exc. VAT: £6.58 Inc. VAT: £7.90
    The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that has been designed to give your projects an edge in their lighting capacity. The 8-stick board has been specifically designed to be daisy-chained with other Lumenati boards, thanks to the castellated edge connectors at each end allowing for multiple design options and formations. Additionally, we have labeled the APA102C LEDs on each board with numbers indicating their position in the sequence to help you write code more easily. We especially love using the Lumenati boards to give our flying race drones a bit of style and panache.