Compare Products

You have no items to compare.

RoboSavvy
Categories

Shopping Cart

0 item £0.00

My Cart -

0 item
Shop By
Currently Shopping by:
  1. Remove This Item Category: GPS
  2. Remove This Item Manufacturer: SparkFun

Shopping Options

Category
  1. Antennas (12)
  2. Accessories (4)
  3. Modules (8)
  4. Eval Boards (11)
Price
£0 £243 £0 to £243
Manufacturer
  1. SparkFun (36)
Compare Products

You have no items to compare.

Sparkfun

SparkfunWe are one of the first Authorised Sparkfun Distributor in the UK. As SparkFun UK distributors we stock a huge range of SparkFun items – boards; modules; individual components; kits; and of course development boards including the Arduino, the Netduino and the SparkFun Redboard. Simply choose your desired development platform and let your imagination run wild!

Do you need advice on how to use a SparkFun product? Give us a call or email us and we will spend time with you on the phone to check what best suits your needs.

Our catalog is syncronized every day with the SparkFun website data, if there's a new product in the SparkFun website it will automatically be added to our store.

As SparkFun has a huge catalog we are not able to keep everything in stock. On each SparkFun item that's not in stock, there's a message saying when our next order with them will be placed and, if you can wait,just place an order and it will be included in our next order from the USA.

 

We are currently ordering from SparkFun every 3 weeks however this time frame can be shortened if we have more orders for SparkFun products; the more you order, the less time you may need to wait for your items.

  1. Exc. VAT: £8.75 Inc. VAT: £10.50
    Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph. 5 meter cable terminated with standard male SMA connector.
  2. Exc. VAT: £1.42 Inc. VAT: £1.70
    Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.
  3. Exc. VAT: £51.83 Inc. VAT: £62.20
    The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution.
  4. Exc. VAT: £2.33 Inc. VAT: £2.80
    This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
  5. Exc. VAT: £1.08 Inc. VAT: £1.30
    Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
  6. Exc. VAT: £2.83 Inc. VAT: £3.40
    This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors.
  7. Exc. VAT: £40.25 Inc. VAT: £48.30
    Copernicus II is the latest iteration of the popular Copernicus GPS module from Trimble. The Trimble Copernicus II delivers proven performance and Trimble quality for a new generation of position-enabled products. It features the TrimCore™ navigation software for extremely fast startup times and high performance in foliage canopy and urban canyon environments. Also, the Copernicus II is compatible with all applications using the previous generation of Copernicus module.
  8. Exc. VAT: £3.92 Inc. VAT: £4.70
    This is a more universal GPS breakout board that uses a vertical SMD connector (EM406) which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers. This is a lower profile breakout and should prove much easier to use while saving space in any project you need it for!
  9. Exc. VAT: £58.75 Inc. VAT: £70.50
    The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. Simply provide 2.7 - 3.3VDC. The Copernicus II DIP breakout has an impedance-matched, end-launch, standard SMA connector that will mate with our SMA GPS antennas listed below.
  10. Exc. VAT: £33.83 Inc. VAT: £40.60
    The EM-506 GPS receiver from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin interface cable included.
  11. Exc. VAT: £37.08 Inc. VAT: £44.50
    The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don't have a lot of space to work in. Really it's quite small.
  12. Exc. VAT: £16.92 Inc. VAT: £20.30
    The GP-20U7 is a compact GPS receiver with a built-in high performances all-in-one GPS chipset. The GP-20U7 accurately provides position, velocity, and time readings as well possessing high sensitivity and tracking capabilities. Thanks to the low power consumption this receiver requires, the GP-20U7 is ideal for portable applications such as tablet PCs, smart phones, and other devices requiring positioning capability.
  13. Exc. VAT: £3.25 Inc. VAT: £3.90
    This is a 4.5" connector cable that interfaces H.FL RF connectors to regular SMA connectors.
  14. Exc. VAT: £9.42 Inc. VAT: £11.30
    Embedded antenna for small, mobile applications. Basic unpackaged antenna with LNA. 5inch cable terminated with standard male SMA connector. Match it with any SMA interface cable to create a truly small GPS prototype!
  15. Exc. VAT: £3.92 Inc. VAT: £4.70
    SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and the PG31 GPS module.
  16. Exc. VAT: £2.33 Inc. VAT: £2.80
    This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails. This little guy can really help your GPS project if you don't have a lot of space to spare! This cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
  17. Exc. VAT: £39.67 Inc. VAT: £47.60
    The SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around a GP3906-TLP GPS Module – a 66-channel GPS receiver featuring a MediaTek MT3339 architecture and up to a 10Hz update rate. The GPS module will stream constant position updates over a simple TTL-level serial port, which you can then log to a µSD card and/or use for other purposes.
  18. SparkFun Mini GPS Shield Sale
    Exc. VAT: £4.11 Inc. VAT: £4.93 £6.70

    The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you'll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around the GP-735 GPS module, a 56-channel GPS receiver featuring a uBlox 7th generation chip set and an up to 10Hz update rate. The board also uses a level shifter, so there’s no need to worry about the logic voltage of your Arduino Mini.
  19. Exc. VAT: £31.75 Inc. VAT: £38.10
    The GPS Mouse is a self contained module perfect for UAV and autonomous vehicle enthusiasts. The The GP-808G inside the Mouse is a highly sensitive GPS module that can accurately provide position, velocity, and time readings. This module is highly accurate and easy to use, requires almost no set-up time, and is very easy to embed into your projects!
  20. Exc. VAT: £27.50 Inc. VAT: £33.00
    The GPS Expansion Board for the Onion Omega is a USB-based expansion that allows your Omega to pinpoint its location using both GPS and China’s BeiDou satellite positioning systems. The GPS Expansion also comes with an onboard GPS antenna, as well as a built-in U.FL connector to attach your own antenna.
  21. Exc. VAT: £40.25 Inc. VAT: £48.30
    The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial ports simultaneously. Using I2C means you won’t have to tie up your serial port with GPS, leaving it open to other possibilities.
  22. Exc. VAT: £61.00 Inc. VAT: £73.20
    The RockBLOCK External Patch Antenna is a high-performance magnetic mount antenna designed specifically to communicate efficiently with the Iridium® Satellite Communication system. This antenna utilizes the Taoglas expertise in ceramics by incorporating a ceramic patch tuned specifically for the antenna environment, giving greater stability.
  23. Exc. VAT: £242.50 Inc. VAT: £291.00
    The Pixhawk 4 is an advanced development kit for the PX4 autopilot and is the latest update to the family of Pixhawk flight controllers. The flight controller has been designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware and features advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
  24. Exc. VAT: £5.50 Inc. VAT: £6.60
    Want to improve your GPS antenna multipath convergence time performance to near survey-grade GNSS levels? Just using this simple steel plate effectively improves simple patch antenna performance to near professional level antenna setups.
  25. Exc. VAT: £155.25 Inc. VAT: £186.30
    With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS modules to 25mm, and that's why we had to put it on this board!
  26. Exc. VAT: £10.00 Inc. VAT: £12.00
    Normal GPS antennas are optimized for the US based GPS reception which is great but with more and more modules capable of tracking additional constellations (termed GNSS receivers) you're going to need the right antenna! This exceptional GPS/GNSS antenna is designed for both GPS and GLONASS reception. When used in conjunction with the SparkFun GPS ground plate this antenna achieved excellent TTFF and SIV statistics for both GPS and GLONASS constellations. The magnetic mount allows it to be easily mounted to a metal base such as a ground plate or car roof. The antenna is terminated with a 3m cable and standard SMA connector.
  27. Exc. VAT: £49.92 Inc. VAT: £59.90
    This tri-band GNSS antenna is ideal for GPS L1, GLONASS L1, and Beidou B2 reception. At 45x45mm it is a large ceramic antenna with an incredible 38dB LNA gain.
  28. Exc. VAT: £44.42 Inc. VAT: £53.30
    Pycom Pytrack Expansion Shield adds the functionality of a super accurate GNSS, Glonass GPS to Pycom development boards. Pytrack shields use a USB interface with serial access while including a LiPo battery charger, MicroSD card capability, and a three-axis, 12-bit accelerometer. These Pycom shields feature an ultra low power operation mode (~1uA in deep sleep) and can operate in -40°C to 85°C temperatures.
  29. Exc. VAT: £200.25 Inc. VAT: £240.30
    With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS modules to to just millimeters, and that's why we had to put it on this board!
  30. Exc. VAT: £201.75 Inc. VAT: £242.10
    The Pixhawk 4 Mini is an advanced (and as the name implies), miniaturized development kit for the PX4 autopilot. The flight controller has been designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware and features advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
  31. Exc. VAT: £55.42 Inc. VAT: £66.50
    The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly launched (started in 2005) L2 GPS band. Additionally, the ANN-MB-00 from u-blox is extremely well built with both a magnetic base with mounting holes for additional anchoring for the harshest environments.
  32. Exc. VAT: £33.25 Inc. VAT: £39.90
    The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
  33. Exc. VAT: £27.83 Inc. VAT: £33.40
    The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery, you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
  34. Exc. VAT: £3.42 Inc. VAT: £4.10
    The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS, Galileo, BeiDou, and GLONASS in three different frequency bands (1561 +/-3MHz, 1575 +/-3MHz, 1602 +/-3MHz).
  35. Exc. VAT: £18.83 Inc. VAT: £22.60
    What is the best chip antenna for your GNSS project? There are tons to choose from, but finding the right one might be tricky so here's a board that helps make deciding easier. The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries. Six different chip antennas have been populated on this board, each with a U.FL connector to attach your chip to the antenna! We've even v-scored the board so you can snap the six antenna's apart and just have the one you need.
  36. Exc. VAT: £166.25 Inc. VAT: £199.50