Compare Products

You have no items to compare.


Shopping Cart

0 item £0.00

My Cart -

0 item

Acrylic Case for HackRF One

Availability: In stock

Exc. VAT: £15.00 Inc. VAT: £18.00



Quick overview

Ideal case to protect your bare PCB. Great if you want to use the internal connectors and don't want to have the PCB laying around.

Assembly Instructions

Warning: Do not overtighten! Hand-tighten only at every step.

  1. Use a guitar pick or spudger to extract the HackRF One circuit board from the black plastic case.
  2. Insert one long screw into each corner of the bottom acrylic panel. Secure each long screw with a short (5 mm) spacer on the opposite side of the panel.
  3. Place the HackRF One circuit board (facing up) on top of the bottom panel, fitting the ends of the long screws through the corner mounting holes of the circuit board.
  4. Secure the circuit board with one long (6 mm) spacer in each corner.
  5. Place the top acrylic panel on top of the circuit board, aligning the cutouts with the circuit board's expansion headers.
  6. Secure each corner with a short screw.

EAN / UPC: 3183434935531
Manufacturer part No: AcrylicCase