How is 3D printed frames>

Dedicated to the new Dynamic Anthropomorphic Robot with Intelligence - Open Platform By Robotis and related projects
3 postsPage 1 of 1
3 postsPage 1 of 1

How is 3D printed frames>

Post by petercohen » Thu May 16, 2013 1:57 am

Post by petercohen
Thu May 16, 2013 1:57 am

I heard that Mike made a DARwIn-OP clone himself at half the price of the commercial version. That is very good. Are the 3D printer made frames strong enough? Do they deform when the motors are hot?
I heard that Mike made a DARwIn-OP clone himself at half the price of the commercial version. That is very good. Are the 3D printer made frames strong enough? Do they deform when the motors are hot?
petercohen offline
Savvy Roboteer
Savvy Roboteer
Posts: 58
Joined: Tue Jul 19, 2011 5:19 am

Post by Gort » Thu May 23, 2013 6:44 pm

Post by Gort
Thu May 23, 2013 6:44 pm

Yes I did make a 3d printed version of the DARwIn-OP :D

They are not as strong as the metal version but they are strong enough.

I use ABS as it has a higher deforming temperature than PLA. I have not notice a problem with my brackets deforming yet with ABS.
Yes I did make a 3d printed version of the DARwIn-OP :D

They are not as strong as the metal version but they are strong enough.

I use ABS as it has a higher deforming temperature than PLA. I have not notice a problem with my brackets deforming yet with ABS.
Gort offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 555
Joined: Wed May 31, 2006 1:00 am
Location: KC, MO, USA

Post by Gort » Wed Sep 04, 2013 11:48 pm

Post by Gort
Wed Sep 04, 2013 11:48 pm

Getting very close:

[media]//www.youtube.com/watch?v=gWpZHsl3M4Q[/media]

http://mike-ibioloid.blogspot.com/2013/ ... ne-20.html
Getting very close:

[media]//www.youtube.com/watch?v=gWpZHsl3M4Q[/media]

http://mike-ibioloid.blogspot.com/2013/ ... ne-20.html
Gort offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 555
Joined: Wed May 31, 2006 1:00 am
Location: KC, MO, USA


3 postsPage 1 of 1
3 postsPage 1 of 1