LiPo Battery Option / Regulator Option and Run Time...

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
16 postsPage 2 of 21, 2
16 postsPage 2 of 21, 2

MRC-3024 Alternative - Perhaps...

Post by PaulL » Fri Mar 15, 2013 11:22 am

Post by PaulL
Fri Mar 15, 2013 11:22 am

A Roboard will work, but it takes a good bit of programming. I'm currently working on using a Z530 SBC with a separate servo controller. The hardware I'm testing with now is using a Maple Mini and an Adafruit 16 channel I2C servo controller.

The Maple Mini and Adafruit servo controller together as a standalone controller should be far more impressive than the stock MRC-3024 with ATMEGA128. :) I have more testing to do, but technically it should work great. No servo position feedback, though... I won't need it for what I'm doing, but some may.
A Roboard will work, but it takes a good bit of programming. I'm currently working on using a Z530 SBC with a separate servo controller. The hardware I'm testing with now is using a Maple Mini and an Adafruit 16 channel I2C servo controller.

The Maple Mini and Adafruit servo controller together as a standalone controller should be far more impressive than the stock MRC-3024 with ATMEGA128. :) I have more testing to do, but technically it should work great. No servo position feedback, though... I won't need it for what I'm doing, but some may.
PaulL offline
Savvy Roboteer
Savvy Roboteer
Posts: 423
Joined: Sat Sep 15, 2007 12:52 am

Previous
Previous
16 postsPage 2 of 21, 2
16 postsPage 2 of 21, 2
cron