setting Library Environment in AVR Studio for CM-700

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
6 postsPage 1 of 1
6 postsPage 1 of 1

setting Library Environment in AVR Studio for CM-700

Post by adamsya » Thu Jul 12, 2012 10:23 am

Post by adamsya
Thu Jul 12, 2012 10:23 am

Hi,

I have CM-700 controller and two sensor that are flexiforce and PING))).. this two sensor will be mount to Crustcrawler AX-18A arm bot

So I have to use embedded C winAVR

I have download latest WINAVR 20100110 and AVR studio 5.1

Then I refer instruction below:
http://support.robotis.com/en/software/embeded_c/cm510_cm700/quickstart/etc_preparation.htm

But I dont know how to set the library environment because Cannot find project - Configuration Options
?
Is the example in url above show picture of AVR studio 4?

Can someone guide me please..

thanks~ :D
Hi,

I have CM-700 controller and two sensor that are flexiforce and PING))).. this two sensor will be mount to Crustcrawler AX-18A arm bot

So I have to use embedded C winAVR

I have download latest WINAVR 20100110 and AVR studio 5.1

Then I refer instruction below:
http://support.robotis.com/en/software/embeded_c/cm510_cm700/quickstart/etc_preparation.htm

But I dont know how to set the library environment because Cannot find project - Configuration Options
?
Is the example in url above show picture of AVR studio 4?

Can someone guide me please..

thanks~ :D
adamsya offline
Robot Builder
Robot Builder
Posts: 7
Joined: Tue May 29, 2012 7:18 am

Post by adamsya » Thu Jul 12, 2012 10:26 am

Post by adamsya
Thu Jul 12, 2012 10:26 am

Btw have someone ever try PING sensor at CM-700 or atmel2561.. could you give me some sampe program pleasee~~
Btw have someone ever try PING sensor at CM-700 or atmel2561.. could you give me some sampe program pleasee~~
adamsya offline
Robot Builder
Robot Builder
Posts: 7
Joined: Tue May 29, 2012 7:18 am

Post by Fritzoid » Thu Jul 12, 2012 12:03 pm

Post by Fritzoid
Thu Jul 12, 2012 12:03 pm

adamsya,

You should be able to adapt the code used by arduino programmers to drive a PING))) sensor. Take a look at http://arduino.cc/en/Tutorial/Ping?from=Tutorial.UltrasoundSensor to see an example of the high-level code they use. The source code for the low-level routines such as pulseIn and delayMicroseconds would have to be cribbed as well.
adamsya,

You should be able to adapt the code used by arduino programmers to drive a PING))) sensor. Take a look at http://arduino.cc/en/Tutorial/Ping?from=Tutorial.UltrasoundSensor to see an example of the high-level code they use. The source code for the low-level routines such as pulseIn and delayMicroseconds would have to be cribbed as well.
Fritzoid offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 331
Joined: Mon Dec 18, 2006 1:00 am

Post by adamsya » Fri Jul 13, 2012 5:19 am

Post by adamsya
Fri Jul 13, 2012 5:19 am

@aa
@aa
Last edited by adamsya on Fri Jul 13, 2012 7:14 am, edited 1 time in total.
adamsya offline
Robot Builder
Robot Builder
Posts: 7
Joined: Tue May 29, 2012 7:18 am

Post by adamsya » Fri Jul 13, 2012 5:24 am

Post by adamsya
Fri Jul 13, 2012 5:24 am

Thanks Fritzoid,

is arduino use atmel microcontroller and AVR compiler? sorry i never use arduino before..

btw do you know how to set the AVRstudio library environment for cm700?
Thanks Fritzoid,

is arduino use atmel microcontroller and AVR compiler? sorry i never use arduino before..

btw do you know how to set the AVRstudio library environment for cm700?
adamsya offline
Robot Builder
Robot Builder
Posts: 7
Joined: Tue May 29, 2012 7:18 am

Post by adamsya » Fri Jul 13, 2012 8:45 am

Post by adamsya
Fri Jul 13, 2012 8:45 am

Thanks Fritzoid,

is arduino use atmel microcontroller and AVR compiler? sorry i never use arduino before..

btw do you know how to set the AVRstudio library environment for cm700?
Thanks Fritzoid,

is arduino use atmel microcontroller and AVR compiler? sorry i never use arduino before..

btw do you know how to set the AVRstudio library environment for cm700?
adamsya offline
Robot Builder
Robot Builder
Posts: 7
Joined: Tue May 29, 2012 7:18 am


6 postsPage 1 of 1
6 postsPage 1 of 1