How-to: Print with the Thing o Matic

3D printers, custom projects and parts for enhancing your robot or creating one from scratch.
1 postPage 1 of 1
1 postPage 1 of 1

How-to: Print with the Thing o Matic

Post by robosavvy » Fri Dec 10, 2010 7:42 pm

Post by robosavvy
Fri Dec 10, 2010 7:42 pm

Hi all

Here is the Official How-to Print Objects on the Thing o Matic
http://wiki.makerbot.com/thingomatic-doc:how-to-print

Image

http://wiki.makerbot.com/thingomatic-doc:how-to-print

The page also links to additional information like Maintenance and Finetuning and Calibration:

Maintenance: http://wiki.makerbot.com/thingomatic-doc:maintenance

Fine Tuning and Calibration: http://wiki.makerbot.com/thingomatic-doc:calibration

Regards
RoboSavvy
Hi all

Here is the Official How-to Print Objects on the Thing o Matic
http://wiki.makerbot.com/thingomatic-doc:how-to-print

Image

http://wiki.makerbot.com/thingomatic-doc:how-to-print

The page also links to additional information like Maintenance and Finetuning and Calibration:

Maintenance: http://wiki.makerbot.com/thingomatic-doc:maintenance

Fine Tuning and Calibration: http://wiki.makerbot.com/thingomatic-doc:calibration

Regards
RoboSavvy
robosavvy offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 157
Joined: Thu Oct 14, 2004 1:00 am

1 postPage 1 of 1
1 postPage 1 of 1
cron