how can i edit actions to control AX-12As by using RB110

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
3 postsPage 1 of 1
3 postsPage 1 of 1

how can i edit actions to control AX-12As by using RB110

Post by cug_Luker » Wed Mar 14, 2012 7:52 am

Post by cug_Luker
Wed Mar 14, 2012 7:52 am

help!
i use RB110,the problem is ,how can I use bioloid robot servos(AX-12)to edit an action,.I do not have the AX-12 dedicated controller---the CM5.so,i can't use roboplus,right??
I can move single servo with my ideas..But how can let robot , for example, walk???Can anyone tell me???ROIO library only tell me how to deal with a single servo.....
do i need to
please help!
help!
i use RB110,the problem is ,how can I use bioloid robot servos(AX-12)to edit an action,.I do not have the AX-12 dedicated controller---the CM5.so,i can't use roboplus,right??
I can move single servo with my ideas..But how can let robot , for example, walk???Can anyone tell me???ROIO library only tell me how to deal with a single servo.....
do i need to
please help!
cug_Luker offline
Newbie
Newbie
Posts: 3
Joined: Wed Mar 14, 2012 7:30 am

Re: how can i edit actions to control AX-12As by using RB110

Post by roboard » Thu Mar 15, 2012 11:56 am

Post by roboard
Thu Mar 15, 2012 11:56 am

Hi,

there are many examples on the internet (just google them). And the following open-source project is a very good reference:

http://bioloidcontrol.sourceforge.net/
Hi,

there are many examples on the internet (just google them). And the following open-source project is a very good reference:

http://bioloidcontrol.sourceforge.net/
roboard offline
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am

Re: how can i edit actions to control AX-12As by using RB110

Post by cug_Luker » Fri Mar 16, 2012 5:14 am

Post by cug_Luker
Fri Mar 16, 2012 5:14 am

roboard wrote:Hi,

there are many examples on the internet (just google them). And the following open-source project is a very good reference:

http://bioloidcontrol.sourceforge.net/


thanks a lot ,roboard.
what u said means a lot for me !!
roboard wrote:Hi,

there are many examples on the internet (just google them). And the following open-source project is a very good reference:

http://bioloidcontrol.sourceforge.net/


thanks a lot ,roboard.
what u said means a lot for me !!
cug_Luker offline
Newbie
Newbie
Posts: 3
Joined: Wed Mar 14, 2012 7:30 am


3 postsPage 1 of 1
3 postsPage 1 of 1