RoBoard RB-110 weight and 3d model

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
3 postsPage 1 of 1
3 postsPage 1 of 1

RoBoard RB-110 weight and 3d model

Post by exe_cutable » Tue Nov 09, 2010 5:54 pm

Post by exe_cutable
Tue Nov 09, 2010 5:54 pm

Hi,

Does anyone know where I can get the 3d model of the RoBoard RB-110?
Also the weight, center of mass, inertia matrix all data for a physical simulation of the board (attached to a robot) would be nice =)

Regards,
Jorge
Hi,

Does anyone know where I can get the 3d model of the RoBoard RB-110?
Also the weight, center of mass, inertia matrix all data for a physical simulation of the board (attached to a robot) would be nice =)

Regards,
Jorge
exe_cutable offline
Newbie
Newbie
Posts: 5
Joined: Tue Nov 09, 2010 5:49 pm

Post by matt.stevenson » Wed Nov 10, 2010 3:07 am

Post by matt.stevenson
Wed Nov 10, 2010 3:07 am

On the website they list 96 x 56 mm and a weight of 40g You'll have to take the other measurements independently since the values will change depending on what you have connected and where.
On the website they list 96 x 56 mm and a weight of 40g You'll have to take the other measurements independently since the values will change depending on what you have connected and where.
matt.stevenson offline
Savvy Roboteer
Savvy Roboteer
Posts: 37
Joined: Thu Apr 29, 2010 9:29 pm

Post by comds » Mon Mar 14, 2011 1:41 pm

Post by comds
Mon Mar 14, 2011 1:41 pm

I could not find a 3d model of any kind for any of the Roboard products. I made a very crude one for Solidworks 2007 for the RB-100. It is more just for spacing the parts around it then a real model. Will be adding detail to it as I get more spare time.
I could not find a 3d model of any kind for any of the Roboard products. I made a very crude one for Solidworks 2007 for the RB-100. It is more just for spacing the parts around it then a real model. Will be adding detail to it as I get more spare time.
comds offline
Robot Builder
Robot Builder
Posts: 14
Joined: Thu Mar 04, 2010 5:17 pm


3 postsPage 1 of 1
3 postsPage 1 of 1
cron