Compare Products

You have no items to compare.

Categories

Shopping Cart

0 item £0.00

My Cart -

0 item

VEX Protobot Robot Kit


Availability: Out of stock

SKU:

VEX-276-2231

Quick overview

The VEX Protobot Robot Kit contains over 300 parts and pieces which can be used to build the VEX Protobot, the VEX Tumbler, or some creation of your own!

VEX Protobot Robot Kit

The VEX Protobot Robot Kit contains over 300 parts and pieces which can be used to build the VEX Protobot, the VEX Tumbler, or some creation of your own!

  • 300+ Parts.
  • Full plans for building Protobot and Tumbler.
  • Includes structural metal, fasteners, wheels, gears, and motors.

NOTE: A VEX Robot Control System is not included with this kit. Combine the Protobot Robot Kit with your VEX control system or adapt your own controller system for a complete working robot.

The VEX Protobot Robot Kit serves as the core around which all of our Robot Starter Bundles and Classroom Bundles are based. Bundles offer the best way to buy a complete robot package while saving you money because they combine the required control systems with the Protobot Robot Kit at a discount. When combined with one of our control system options you can create a radio control, programmable autonomous or dual control robot. This kit contains over 300 parts, pieces and detailed assembly instructions in the form of a Quick Start Guide to build the VEX Protobot Robot, the VEX Tumbler Robot, or some creation of your own design!

If you already own a VEX robot control system, the Protobot Robot Kit includes all the structural metal, fasteners, wheels, gears, and motors you'll need to build either the Protobot or Tumbler robot designs.

Kit Contents

  • Motion
    • 4 x 2-Wire Motor 269
    • 21 x Shaft Collar
    • 4 x Shaft, 2" Long
    • 6 x Shaft, 3" Long
    • 1 x Shaft, 4" Long
    • 20 x Bearing Flat
    • 4 x Gear, 12-tooth
    • 4 x Gear, 36-tooth
    • 6 x Gear, 60-tooth
    • 2 x Gear, 84-tooth
    • 4 x 5" Wheel
    • 4 x 4" Wheel
    • 4 x 2.75" Wheel
  • Metal
    • 2 x Bar, 25-hole
    • 1 x Plate, 5 x 15 hole
    • 2 x Chassis Bumper (15-hole)
    • 4 x Chassis Rail (16-hole)
    • 2 x C-Channel, 1x2x1x15 hole
    • 1 x C-Channel, 1x2x1x25 hole
  • Electrical
    • 4 x Motor Controller 29
    • 1 x Robot AA Battery Holder
  • Hardware
    • 54 x Screw, 8-32 x 1/4" Long
    • 15 x Screw, 8-32 x 3/8" Long
    • 12 x Screw, 8-32 x 1/2" Long
    • 2 x Screw, 8-32 x 3/4" Long
    • 10 x Screw, 6-32 x 1/4" Long
    • 8 x Screw, 6-32 x 1/2" Long
    • 34 x Nut, 8-32 Keps
    • 4 x Standoff, 3" Long
    • 4 x Standoff, 2" Long
    • 6 x Standoff, 1" Long
    • 4 x Standoff, 1/2" Long
    • 12 x Shaft Spacer, Thin (4.6mm)
    • 2 x Shaft Spacer, Thick (8mm)
    • 100 x 4" Tie Wraps
    • 50 x Bearing Pop-Rivet
  • Equipment
    • 1 x Tool, Allen Wrench Small (5/64")
    • 1 x Tool, Allen Wrench Large (3/32")
    • 1 x Tool, VEX Open-Ended Wrench
    • 1 x Tool, Nut Starter
    • 1 x Manual, Protobot & Tumbler

Downloads & Docs:

Specifications:

  • Drive Base Width:12.375"
  • Drive Base Length:9.125"
  • Arm Length:17" (arm all the way down pointing forward off the front of the robot)
  • Arm Height Down:8" (arm all the way down pointing forward off the front of the robot)
  • Arm Height Up:17.75" (arm all the way up)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write your own review