Robotis - Dynamixel MX-28

DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module.

MX series is a new concept of DYNAMIXEL with advanced functions like precise control, PID control, 360 degree of position control and high speed communication.

Characteristics:

• Advanced durability, degree of precision, and wider control zone were achieved thanks to newly applied CONTACTLESS ABSOLUTE ENCODER
• 360º POSITION CONTROL without dead zone
• 4096 PRECISE RESOLUTION by 0.088º
• SPEED CONTROL at ENDLESS TURN MODE
• Reliability and accuracy were advanced in the position control through PID CONTROL
• High baud rate up to 3Mbps
• TTL LEVEL COMMUNICATION

Includes

• 1 x DYNAMIXEL
• 1 x HORN RX28 HN07-N101 Set
• 1 x Thrust Washer (for horn assembly)
• 1 x 3 pin cable 200mm
• 16 x Wrench Bolt (WB M2.5*6)
• 10 x Wrench Bolt (WB M2*3)
• 18 x Nut M2.5

Hardware Specifications

• Weight: 72g
• Dimension: 36.5mm x 50.6mm x 35.5mm
• Gear Ratio: 193:1
• Stall Torque: 24kgf.cm @ 12V, 1.5A
• No Load Speed: 54 RPM @ 12V
• Motor: Maxon Motor
• Resolution: About 0.088º (4096 positions)
• Movement Range in Joint Mode: 360º
• Movement Range in Wheel Mode: Endless turn (Position control available)
• Operating Voltage: 9 to 16.8V (Recomended voltage: 12V)
• Working temperature: -5ºC to 80ºC
• Command signal: Digital Packet
• Protocol: Half duplexAsynchronous Serial Comunication (8bit, 1stop, No Parity)
• Link (physical): TTL Milti Drop (daisy chain type connector)
• ID: 0 to 253
• Baud Rate: 8000bps to 3Mbps
• Feedback Function: Position, Temperature, Load, Input Voltage, etc.
• Case Material: Engineering Plastic
• Gear Material: Full Metal
• Position Sensor: Contactless absolute encoder (Magnetic encoder)

Initial Settings

• ID: 1
• Baud rate: 57600bps
  (Please change the default setting of ID and baud rate depending on your operating environment.)

Compatible Products

• Controller: CM-5, CM-510, CM-700
• Interface: USB2Dynamixel (TTL)
• N1 Type Horn: RX-28 HN07-N1 Set, RX-28 HN07-T1 Set, RX-28 HN07-I1 Set
• N101 Type Horn: RX-24F/RX-28 HN07 N101 Set, RX-24F/RX-28 HN07-T101 Set, RX-24F/RX-28 HN07-I101 Set
• N1 Frame: RX-28 FR07 H1 Set, RX-28 FR07-S1 Set, RX-28 FR07-B1 Set
• N101 Type Frame: RX-24F/RX-28 FR07-H101 Set, RX-24F/RX-28 FR07 S1001 Set, RX-24F/RX-28 FR07 B101K Set, RX-24F/RX-28 FR07-F101K Set, RX-24F/RX-28 FR07-X101K Set

Controlling / Developing environment