Robobuilder Hexapod Spider Extension Kit

This extension kit is an add-on to Robobuilder 5710K and 5720T Kits in order to build Hexapod Spider.

The Kit includes 2 extra servos (to build an 18 DoF Spider) and an extra Joint Set.
In addition, a complete set of Motion Files is provided so you can start using your Hexapod right after you assembly it.

Assembly and Programming Instructions:

• Hardware Assembly
  For the Hardware Assembly you need to take the following steps:
1. You need to Re program the ID of the Servos included with this Kit to ID 16 and 17. Please follow the instructions for Reprogramming wCk Servo ID to complete this procedure.
    
2. Once the Servo IDs are programmed, follow the Hexapod Spider Assembly Instructions
    
• Download the Spider Motion Files to the Controller
   
  1. Download the Motion File Pack: Standard Motion Pack | Standard Motion Pack with LED Effects (includes LED effects for 5720T Transparent Servos)
      
  2. Connect the RBC Controller to your computer
     Open the Robobuilder Download Tool and download all of the MTN files (included in the ZIP files above) to the controller.
     (if you're not familiar with the Robobuilder Download Tool, please read the PDF file with instructions that accompany this tool)
      
  3. Turn on the Robot and Press and Hold the PF2 button for 3 seconds until the PF2 LED turns Orange. This will put your Robobuilder in Custom Platform mode to operate as Hexapod (please see the Robobuilder Manual, page 72 for more information about different Platform settings).

The Hexapod is now Ready to Run. To operate the Hexapod, press Buttons 0-9 on your Remote Control.

Kit Contents:

• 2x wCK 1111 Servos
• 1x Joint Set #1
  
  ! Important Note: By default we ship the kit with Black Servos. If you have a 5720T and prefer Transparent servos, please add a Comment about this when placing your order.

Compatibility:

• Robobuilder 5710K
• Robobuilder 5720T