Dagu - Quadbot Spider Chassis with Servos
The Quadbot is a small 4
legged robot with 8 micro servos and is ready to use with the
Spider Controller (Arduino Mega) or any other controller capable of PWM
output to drive the included servos.
The Kit includes the Laser Cut Acrylic parts, Leg Segments and 8 Micro servos.
You will need to add a Micro Controller (we recommend the
Spider Controller) and a Battery
to make a Fully functional Kit (you may also want to check the
Spider as a Complete Kit).
Please Note: The kit includes Only the Chassis and Servos as shown in the
two first pictures above.
The two pictures in the second line, show the Robot assembled with a Micro
Controller and Battery holder. These pictures are for illustrative purposes only
as the Micro Controller and Battery Holder need to be purchased separately.
4x 3mm x 12mm pan head screws
8x 2mm x 6mm self tapping screws
8x 2mm x 8mm pan head screws
16x 2mm x 6mm pan head screws
16x 2.3mm x 8mm self tapping screws
1x laser cut acrylic mounting plate
4x foam rubber feet
8x leg segments
8x Miniature Servos
Torque: 1.5Kg / cm @ 6V
Speed: 0.1 sec / 60 degrees
Max voltage: 6V
Operating Angle: 180 degrees
To make a Fully Functional Robot you'll also
need to Purchase (separately):
You may also want to check the
Quadbot Spider as a Complete Kit which includes the full set of
components to build a Walking Robot.
Please see the "Related Products" section bellow to find out more
products and accessories.
Source Code and Assembly Instructions: