ON ITS WAY

Takahashi's design (robo-garage.com), Kondo servos and controller, and kit production by RC company Kyosho brought to life PF01.
9 postsPage 1 of 1
9 postsPage 1 of 1

ON ITS WAY

Post by chocobot » Mon Apr 09, 2007 9:05 pm

Post by chocobot
Mon Apr 09, 2007 9:05 pm

i just ordered a manoi ....what tips do i need to build it?

choco
i just ordered a manoi ....what tips do i need to build it?

choco
chocobot offline
Savvy Roboteer
Savvy Roboteer
Posts: 31
Joined: Mon Apr 02, 2007 7:35 pm

Post by lampcov » Mon Apr 09, 2007 11:33 pm

Post by lampcov
Mon Apr 09, 2007 11:33 pm

Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc
Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc
lampcov offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 50
Joined: Wed Dec 13, 2006 1:00 am

Post by chocobot » Mon Apr 09, 2007 11:46 pm

Post by chocobot
Mon Apr 09, 2007 11:46 pm

lampcov wrote:Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc


THANKS
lampcov wrote:Read through this forum and without a doubt hit

http://www.botconnect.com which is the home of the American Manoi Users Group.

Marc


THANKS
chocobot offline
Savvy Roboteer
Savvy Roboteer
Posts: 31
Joined: Mon Apr 02, 2007 7:35 pm

Post by chocobot » Tue Apr 10, 2007 6:20 pm

Post by chocobot
Tue Apr 10, 2007 6:20 pm

it should be in my hands tomorrow
it should be in my hands tomorrow
chocobot offline
Savvy Roboteer
Savvy Roboteer
Posts: 31
Joined: Mon Apr 02, 2007 7:35 pm

Post by Orac » Tue Apr 10, 2007 7:50 pm

Post by Orac
Tue Apr 10, 2007 7:50 pm

Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.
Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.
Orac offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 299
Joined: Wed Feb 21, 2007 12:46 am
Location: UK, Near Aylesbury

Post by chocobot » Tue Apr 10, 2007 8:27 pm

Post by chocobot
Tue Apr 10, 2007 8:27 pm

Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.


thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.


thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?
chocobot offline
Savvy Roboteer
Savvy Roboteer
Posts: 31
Joined: Mon Apr 02, 2007 7:35 pm

Post by tempusmaster » Wed Apr 11, 2007 10:31 pm

Post by tempusmaster
Wed Apr 11, 2007 10:31 pm

chocobot wrote:
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.


thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.
chocobot wrote:
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.


thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.
Latest robot news, information, reviews, hacks, photos, and videos - with special on-site coverage from Japan
http://www.robots-dreams.com
tempusmaster offline
Site Admin
Site Admin
User avatar
Posts: 532
Joined: Thu Oct 27, 2005 1:00 am

Post by chocobot » Wed Apr 11, 2007 10:46 pm

Post by chocobot
Wed Apr 11, 2007 10:46 pm

tempusmaster wrote:
chocobot wrote:
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.


thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.



thanks
tempusmaster wrote:
chocobot wrote:
Orac wrote:Wow, thats quick.

I have a Manoi, but didn't do much of the assembly myself.

You need to be sure to check the manual very carefully and follow the home position setup exactly.

Also, grease needs to be applied (small pot included) on some of the joints as per the manual.

Can you read Japanese?

If not, I posted a translation (very bad) on the forums which may or may not help.

Good luck.


thanks...
i do not read Japanese...where is that link?
what kind of grease do i need?

The required grease is supplied with the kit.



thanks
chocobot offline
Savvy Roboteer
Savvy Roboteer
Posts: 31
Joined: Mon Apr 02, 2007 7:35 pm

Post by Orac » Thu Apr 12, 2007 12:22 am

Post by Orac
Thu Apr 12, 2007 12:22 am

http://robosavvy.com/forum/viewtopic.ph ... ight=#7505

My post is near the bottom of the thread above
http://robosavvy.com/forum/viewtopic.ph ... ight=#7505

My post is near the bottom of the thread above
Orac offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 299
Joined: Wed Feb 21, 2007 12:46 am
Location: UK, Near Aylesbury


9 postsPage 1 of 1
9 postsPage 1 of 1