i2c

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
2 postsPage 1 of 1
2 postsPage 1 of 1

i2c

Post by ramazoti » Tue Jul 16, 2013 4:27 pm

Post by ramazoti
Tue Jul 16, 2013 4:27 pm

Hello,

Acttualy i'm programming by C#,i need to learn the data(distance of two infrarouge sensors) from a PIC24F and after i will use this data.
the statment used is already in the datasheet of RB 110.
RoBoIO.i2c_Receive(0x62, buf, 2)
i can learn the data through the statment above but i'm asking how i will save this datas because i will use them to compare with other data

Ramazoti
Hello,

Acttualy i'm programming by C#,i need to learn the data(distance of two infrarouge sensors) from a PIC24F and after i will use this data.
the statment used is already in the datasheet of RB 110.
RoBoIO.i2c_Receive(0x62, buf, 2)
i can learn the data through the statment above but i'm asking how i will save this datas because i will use them to compare with other data

Ramazoti
ramazoti offline
Newbie
Newbie
Posts: 1
Joined: Tue Jul 16, 2013 4:16 pm

Post by PaulL » Wed Jul 17, 2013 6:08 am

Post by PaulL
Wed Jul 17, 2013 6:08 am

PaulL offline
Savvy Roboteer
Savvy Roboteer
Posts: 423
Joined: Sat Sep 15, 2007 12:52 am


2 postsPage 1 of 1
2 postsPage 1 of 1