Plastic Rivets

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
3 postsPage 1 of 1
3 postsPage 1 of 1

Plastic Rivets

Post by rcassandra » Thu May 24, 2012 8:53 pm

Post by rcassandra
Thu May 24, 2012 8:53 pm

Hi, All!

So this is sort of a reach, but I was wondering if anyone had come up with replacement option for the plastic rivets.

I'm working on an intermediate level excavator style, and I was just using a base of a beginner kit and bought the extra dynamixels that I needed. However, I seem to have run out of the plastic rivets to attach the sensors to the F54 piece.

Anybody run into this problem before? Is there an easy fix without ordering and waiting for these parts?

THANKS!!
Hi, All!

So this is sort of a reach, but I was wondering if anyone had come up with replacement option for the plastic rivets.

I'm working on an intermediate level excavator style, and I was just using a base of a beginner kit and bought the extra dynamixels that I needed. However, I seem to have run out of the plastic rivets to attach the sensors to the F54 piece.

Anybody run into this problem before? Is there an easy fix without ordering and waiting for these parts?

THANKS!!
rcassandra offline
Newbie
Newbie
Posts: 2
Joined: Fri Sep 09, 2011 6:21 pm

Post by siempre.aprendiendo » Thu May 24, 2012 11:22 pm

Post by siempre.aprendiendo
Thu May 24, 2012 11:22 pm

Have you used the 14 rivets?
Have you used the 14 rivets?
siempre.aprendiendo offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 559
Joined: Wed Aug 08, 2007 9:13 pm
Location: Barcelona

Post by Enderwiggins » Sat May 26, 2012 2:51 pm

Post by Enderwiggins
Sat May 26, 2012 2:51 pm

Enderwiggins offline
Robot Builder
Robot Builder
Posts: 24
Joined: Mon Jul 07, 2008 3:56 am


3 postsPage 1 of 1
3 postsPage 1 of 1