About using of ZIG100 and ZIG2serial

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
1 postPage 1 of 1
1 postPage 1 of 1

About using of ZIG100 and ZIG2serial

Post by HThien » Wed Mar 26, 2008 8:31 am

Post by HThien
Wed Mar 26, 2008 8:31 am

Dear All,


I am using a pair of ZIG100 and one ZIG2serial to transfer the data from BX24 to computer.

I connected 1 ZIG 100 (power by a power source of 3.3V regulator) directly to BX24, another ZIG100 is installed to ZIG2serial (powered by 5v regulator power source).

After that I try to transfer some things like "Hello word" in string format.
I received some thing in the robot terminal program, but it's not the charater "Hello word". Do I need something else to get the good result for this.

How can we transfer data by using only ZIG100 and ZiG2serial (without CM2 or CM5)

Any suggestion is appreciated.

Thank you in advance for sharing with me your experience.

PhuocThien,
Dear All,


I am using a pair of ZIG100 and one ZIG2serial to transfer the data from BX24 to computer.

I connected 1 ZIG 100 (power by a power source of 3.3V regulator) directly to BX24, another ZIG100 is installed to ZIG2serial (powered by 5v regulator power source).

After that I try to transfer some things like "Hello word" in string format.
I received some thing in the robot terminal program, but it's not the charater "Hello word". Do I need something else to get the good result for this.

How can we transfer data by using only ZIG100 and ZiG2serial (without CM2 or CM5)

Any suggestion is appreciated.

Thank you in advance for sharing with me your experience.

PhuocThien,
HThien offline
Newbie
Newbie
Posts: 1
Joined: Wed Mar 26, 2008 8:06 am

1 postPage 1 of 1
1 postPage 1 of 1