New Robotis XL-320: Weaker but faster

Bioloid robot kit from Korean company Robotis; CM5 controller block, AX12 servos..
1 postPage 1 of 1
1 postPage 1 of 1

New Robotis XL-320: Weaker but faster

Post by siempre.aprendiendo » Wed Jan 08, 2014 1:17 pm

Post by siempre.aprendiendo
Wed Jan 08, 2014 1:17 pm

New Robotis XL-320: Weaker but faster

Google translation from Korean:
http://translate.google.es/translate?hl ... xl-320.htm

Image

Main Specifications

Weight: 16.7g
Size: 24mm * 36mm * 27mm
Each of the minimum control: 0.29 °
Motor: Cored Motor
Gear ratio: 238: 1
Stall Torque: 0.39 Nm (at 7.4V)
No load speed: 114 rpm (at 7.4V)
Operation mode
Joint mode (0 ° ~ 300 °)
Wheel Mode (Infinite Rotation)
Operating temperature: -5 ℃ ~ +70 ℃
Operating voltage: 6 ~ 8.4V (recommended voltage 7.4V)
Command Signal: Digital Packet
Protocol Type: Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical): TTL Level Multi Drop (daisy chain type Connector)
ID: 253 ID (0 ~ 252)
Baud Rate: 7843bps ~ 1 Mbps
Feedback: Position, Temperature, Load, Input Voltage, etc.
Material: Engineering Plastic
New Robotis XL-320: Weaker but faster

Google translation from Korean:
http://translate.google.es/translate?hl ... xl-320.htm

Image

Main Specifications

Weight: 16.7g
Size: 24mm * 36mm * 27mm
Each of the minimum control: 0.29 °
Motor: Cored Motor
Gear ratio: 238: 1
Stall Torque: 0.39 Nm (at 7.4V)
No load speed: 114 rpm (at 7.4V)
Operation mode
Joint mode (0 ° ~ 300 °)
Wheel Mode (Infinite Rotation)
Operating temperature: -5 ℃ ~ +70 ℃
Operating voltage: 6 ~ 8.4V (recommended voltage 7.4V)
Command Signal: Digital Packet
Protocol Type: Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical): TTL Level Multi Drop (daisy chain type Connector)
ID: 253 ID (0 ~ 252)
Baud Rate: 7843bps ~ 1 Mbps
Feedback: Position, Temperature, Load, Input Voltage, etc.
Material: Engineering Plastic
siempre.aprendiendo offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 559
Joined: Wed Aug 08, 2007 9:13 pm
Location: Barcelona

1 postPage 1 of 1
1 postPage 1 of 1
cron