Hand Of Bob - My Robonova Hands Video

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
20 postsPage 2 of 21, 2
20 postsPage 2 of 21, 2

Post by Kelpy » Tue Apr 05, 2011 9:19 pm

Post by Kelpy
Tue Apr 05, 2011 9:19 pm

Hi.

The head in that video is actually made from a car gear lever knob which I modified.

My RN currently has a head made from an old broken Robosapien 1.

http://www.youtube.com/watch?v=3-pTSti-acY
Hi.

The head in that video is actually made from a car gear lever knob which I modified.

My RN currently has a head made from an old broken Robosapien 1.

http://www.youtube.com/watch?v=3-pTSti-acY
Kelpy offline
Savvy Roboteer
Savvy Roboteer
Posts: 43
Joined: Wed Jul 14, 2010 6:42 pm

Help me please with hands aka grippers

Post by xSVxSHaDOwZ » Wed Apr 06, 2011 3:02 am

Post by xSVxSHaDOwZ
Wed Apr 06, 2011 3:02 am

Kelpy wrote:Hi.

The head in that video is actually made from a car gear lever knob which I modified.

My RN currently has a head made from an old broken Robosapien 1.

http://www.youtube.com/watch?v=3-pTSti-acY

Hey I was watching that video your yous made.... and what is that set of hands he has? And after that would it be better my RBN-1 like can he still do the flipping or summersaults or push_ups to? Can you help me please but I need something that is not going to kill my budget.

Thanks to all people and BOB,
CJ aka xSVxSHaDOwZ
Kelpy wrote:Hi.

The head in that video is actually made from a car gear lever knob which I modified.

My RN currently has a head made from an old broken Robosapien 1.

http://www.youtube.com/watch?v=3-pTSti-acY

Hey I was watching that video your yous made.... and what is that set of hands he has? And after that would it be better my RBN-1 like can he still do the flipping or summersaults or push_ups to? Can you help me please but I need something that is not going to kill my budget.

Thanks to all people and BOB,
CJ aka xSVxSHaDOwZ
xSVxSHaDOwZ offline
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Fri Mar 25, 2011 5:49 pm

Post by Kelpy » Wed Apr 06, 2011 1:52 pm

Post by Kelpy
Wed Apr 06, 2011 1:52 pm

Hi.

The grips he has in that video, I made myself. They are really easy to do, using a hacksaw, file, drill and hammer/vice to bend them. Yes, he still does all those moves, but not with either of the 2 new heads on. He will only do them with the old head on.


Image


Image
Hi.

The grips he has in that video, I made myself. They are really easy to do, using a hacksaw, file, drill and hammer/vice to bend them. Yes, he still does all those moves, but not with either of the 2 new heads on. He will only do them with the old head on.


Image


Image
Kelpy offline
Savvy Roboteer
Savvy Roboteer
Posts: 43
Joined: Wed Jul 14, 2010 6:42 pm

Post by xSVxSHaDOwZ » Wed Apr 06, 2011 7:50 pm

Post by xSVxSHaDOwZ
Wed Apr 06, 2011 7:50 pm

Kelpy wrote:Hi.

The grips he has in that video, I made myself. They are really easy to do, using a hacksaw, file, drill and hammer/vice to bend them. Yes, he still does all those moves, but not with either of the 2 new heads on. He will only do them with the old head on.


Hey do you think yo can make me some of these :D , I dont have the tools or anything make these :( . Plus the ones you see one the sites are WAY :shock: to much
Kelpy wrote:Hi.

The grips he has in that video, I made myself. They are really easy to do, using a hacksaw, file, drill and hammer/vice to bend them. Yes, he still does all those moves, but not with either of the 2 new heads on. He will only do them with the old head on.


Hey do you think yo can make me some of these :D , I dont have the tools or anything make these :( . Plus the ones you see one the sites are WAY :shock: to much
xSVxSHaDOwZ offline
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Fri Mar 25, 2011 5:49 pm

Jerky Servos

Post by xSVxSHaDOwZ » Fri Apr 08, 2011 4:27 pm

Post by xSVxSHaDOwZ
Fri Apr 08, 2011 4:27 pm

With my RVN-1 my servos seem to be a bit jerky or not as smooth as other RVN-1s I have seen. Is it cause I have stock servos or something like that? Can anyone help me.

Thanks for reading and your time.
CJ aka xSVxSHaDOwZ
With my RVN-1 my servos seem to be a bit jerky or not as smooth as other RVN-1s I have seen. Is it cause I have stock servos or something like that? Can anyone help me.

Thanks for reading and your time.
CJ aka xSVxSHaDOwZ
xSVxSHaDOwZ offline
Savvy Roboteer
Savvy Roboteer
Posts: 34
Joined: Fri Mar 25, 2011 5:49 pm

Previous
Previous
20 postsPage 2 of 21, 2
20 postsPage 2 of 21, 2
cron