Deteriorated sensors

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
3 postsPage 1 of 1
3 postsPage 1 of 1

Deteriorated sensors

Post by RoboJeronimo » Thu Aug 13, 2009 5:16 pm

Post by RoboJeronimo
Thu Aug 13, 2009 5:16 pm

Hi, I have the MAX Sonar and the robonava Tilt Sensor and they don't work as the begining.

The range value of the Tilt Sensor is reducing, the data sheet says the range value is 0-213, but months ago I have to change the range to 60-125, then 80-110 and now It's 90-110. Out of this range sensor doesn't work.

The MAX Sonar gives me ilogical values, without taking into acount the distance that it's measuring.

I check it one by one, with only one pluged sensor. Both sensors are more than 1 year-old. Are they deteriorating? :?:
Hi, I have the MAX Sonar and the robonava Tilt Sensor and they don't work as the begining.

The range value of the Tilt Sensor is reducing, the data sheet says the range value is 0-213, but months ago I have to change the range to 60-125, then 80-110 and now It's 90-110. Out of this range sensor doesn't work.

The MAX Sonar gives me ilogical values, without taking into acount the distance that it's measuring.

I check it one by one, with only one pluged sensor. Both sensors are more than 1 year-old. Are they deteriorating? :?:
RoboJeronimo offline
Robot Builder
Robot Builder
Posts: 19
Joined: Fri Jul 10, 2009 11:54 am

Post by roboticage » Sat Aug 15, 2009 3:56 pm

Post by roboticage
Sat Aug 15, 2009 3:56 pm

Hi
I'm Horia from Romania and I bought 1 year ago TILS sensor for my Robonova and 2 Sharp distance sensors.
The TILT sensor it's working faulty because the range of the response it's other than the manual says , like yours (I do not have a LCD screen to see the actual values but I changed bit by bit the values in the program.)
I think they are poor quality!
Hi
I'm Horia from Romania and I bought 1 year ago TILS sensor for my Robonova and 2 Sharp distance sensors.
The TILT sensor it's working faulty because the range of the response it's other than the manual says , like yours (I do not have a LCD screen to see the actual values but I changed bit by bit the values in the program.)
I think they are poor quality!
roboticage offline
Robot Builder
Robot Builder
Posts: 12
Joined: Wed Jul 23, 2008 9:20 pm

Post by Gort » Sat Aug 15, 2009 9:24 pm

Post by Gort
Sat Aug 15, 2009 9:24 pm

Had the same problem. Left my robot in my car on a hot day. My tilt sensor has not worked right since.
Had the same problem. Left my robot in my car on a hot day. My tilt sensor has not worked right since.
Gort offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 555
Joined: Wed May 31, 2006 1:00 am
Location: KC, MO, USA


3 postsPage 1 of 1
3 postsPage 1 of 1
cron