My continuous walking mod

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
1 postPage 1 of 1
1 postPage 1 of 1

My continuous walking mod

Post by stuuk » Mon May 05, 2008 11:46 pm

Post by stuuk
Mon May 05, 2008 11:46 pm

Hi All

At the risk of trying to teach my granny to suck eggs here's my continuous forward walk routine.

Pressing forward walk on the remote will start RN walking forward seemlesley until told to stop, pressing any key while he is walking will make him resume the standard pose.

Replace the existing forward_walk code between lines 776 and 885 in the standard template with the code below .

Stu

forward_walk:

SPEED 5
MOVE24 85, 71, 152, 91, 112, 60, 100, 40, 80, , , , 100, 40, 80, , , , 112, 76, 145, 93, 92, 60,

loop_walk:
A = REMOCON(1)
A = A - ID
IF a<>0 THEN GOTO exit_walk
GOSUB walk_main
GOTO loop_walk

exit_walk:
SPEED 14
MOVE24 90, 107, 105, 105, 114, 60, 90, 40, 80, , , , 100, 40, 80, , , , 113, 76, 145, 93, 90, 60,
'---------------------------------------

SPEED 5
MOVE24 85, 71, 152, 91, 112, 60, 100, 40, 80, , , , 100, 40, 80, , , , 112, 76, 145, 93, 92, 60,

RETURN

Walk_main:

SPEED 14
'left up
MOVE24 90, 107, 105, 105, 114, 60, 90, 40, 80, , , , 100, 40, 80, , , , 114, 76, 145, 93, 90, 60,
'---------------------------------------
'left down
MOVE24 90, 56, 143, 122, 114, 60, 80, 40, 80, , , , 105, 40, 80, , , , 113, 80, 145, 90, 90, 60,
MOVE24 90, 46, 163, 112, 114, 60, 80, 40, 80, , , , 105, 40, 80, , , , 112, 80, 145, 90, 90, 60,

SPEED 10
'left center
MOVE24 100, 66, 141, 113, 100, 100, 90, 40, 80, , , , 100, 40, 80, , , , 100, 83, 156, 80, 100, 100,
MOVE24 113, 78, 142, 105, 90, 60, 100, 40, 80, , , , 100, 40, 80, , , , 90, 102, 136, 85, 114, 60,

SPEED 14
'right up
MOVE24 113, 76, 145, 93, 90, 60, 100, 40, 80, , , , 90, 40, 80, , , , 90, 107, 105, 105, 114, 60,

'right down
MOVE24 113, 80, 145, 90, 90, 60, 105, 40, 80, , , , 80, 40, 80, , , , 90, 56, 143, 122, 114, 60,
MOVE24 112, 80, 145, 90, 90, 60, 105, 40, 80, , , , 80, 40, 80, , , , 90, 46, 163, 112, 114, 60,

SPEED 10
'right center
MOVE24 100, 83, 156, 80, 100, 100, 100, 40, 80, , , , 90, 40, 80, , , , 100, 66, 141, 113, 100, 100,
MOVE24 90, 102, 136, 85, 114, 60, 100, 40, 80, , , , 100, 40, 80, , , , 113, 78, 142, 105, 90, 60,

RETURN
Hi All

At the risk of trying to teach my granny to suck eggs here's my continuous forward walk routine.

Pressing forward walk on the remote will start RN walking forward seemlesley until told to stop, pressing any key while he is walking will make him resume the standard pose.

Replace the existing forward_walk code between lines 776 and 885 in the standard template with the code below .

Stu

forward_walk:

SPEED 5
MOVE24 85, 71, 152, 91, 112, 60, 100, 40, 80, , , , 100, 40, 80, , , , 112, 76, 145, 93, 92, 60,

loop_walk:
A = REMOCON(1)
A = A - ID
IF a<>0 THEN GOTO exit_walk
GOSUB walk_main
GOTO loop_walk

exit_walk:
SPEED 14
MOVE24 90, 107, 105, 105, 114, 60, 90, 40, 80, , , , 100, 40, 80, , , , 113, 76, 145, 93, 90, 60,
'---------------------------------------

SPEED 5
MOVE24 85, 71, 152, 91, 112, 60, 100, 40, 80, , , , 100, 40, 80, , , , 112, 76, 145, 93, 92, 60,

RETURN

Walk_main:

SPEED 14
'left up
MOVE24 90, 107, 105, 105, 114, 60, 90, 40, 80, , , , 100, 40, 80, , , , 114, 76, 145, 93, 90, 60,
'---------------------------------------
'left down
MOVE24 90, 56, 143, 122, 114, 60, 80, 40, 80, , , , 105, 40, 80, , , , 113, 80, 145, 90, 90, 60,
MOVE24 90, 46, 163, 112, 114, 60, 80, 40, 80, , , , 105, 40, 80, , , , 112, 80, 145, 90, 90, 60,

SPEED 10
'left center
MOVE24 100, 66, 141, 113, 100, 100, 90, 40, 80, , , , 100, 40, 80, , , , 100, 83, 156, 80, 100, 100,
MOVE24 113, 78, 142, 105, 90, 60, 100, 40, 80, , , , 100, 40, 80, , , , 90, 102, 136, 85, 114, 60,

SPEED 14
'right up
MOVE24 113, 76, 145, 93, 90, 60, 100, 40, 80, , , , 90, 40, 80, , , , 90, 107, 105, 105, 114, 60,

'right down
MOVE24 113, 80, 145, 90, 90, 60, 105, 40, 80, , , , 80, 40, 80, , , , 90, 56, 143, 122, 114, 60,
MOVE24 112, 80, 145, 90, 90, 60, 105, 40, 80, , , , 80, 40, 80, , , , 90, 46, 163, 112, 114, 60,

SPEED 10
'right center
MOVE24 100, 83, 156, 80, 100, 100, 100, 40, 80, , , , 90, 40, 80, , , , 100, 66, 141, 113, 100, 100,
MOVE24 90, 102, 136, 85, 114, 60, 100, 40, 80, , , , 100, 40, 80, , , , 113, 78, 142, 105, 90, 60,

RETURN
stuuk offline
Savvy Roboteer
Savvy Roboteer
Posts: 44
Joined: Sun Apr 27, 2008 8:34 pm

1 postPage 1 of 1
1 postPage 1 of 1
cron