YEEEPPEEeeeee......

Hitec robotics including ROBONOVA humanoid, HSR-8498HB servos, MR C-3024 Controllers and RoboBasic
5 postsPage 1 of 1
5 postsPage 1 of 1

YEEEPPEEeeeee......

Post by rep001 » Fri Mar 17, 2006 2:55 pm

Post by rep001
Fri Mar 17, 2006 2:55 pm

:D :D :D :D My Robonova has arrived (thanks Limor) Taken the day off so will start building straight away.I have read most of the threads but any further thoughts/tips b4 i start?? :idea:
:D :D :D :D My Robonova has arrived (thanks Limor) Taken the day off so will start building straight away.I have read most of the threads but any further thoughts/tips b4 i start?? :idea:
rep001 offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 193
Joined: Thu Mar 09, 2006 1:00 am
Location: HERTS UK

Post by limor » Fri Mar 17, 2006 3:13 pm

Post by limor
Fri Mar 17, 2006 3:13 pm

Congratulations!

One tip is to download the PDF of the construction manual and following that rather than using the provided black&whilte paper document.
Also there are a couple of minor errors in the documentation.

Check out http://robosavvy.com/Robonova/2

enjoy your Robonova :lol:
Congratulations!

One tip is to download the PDF of the construction manual and following that rather than using the provided black&whilte paper document.
Also there are a couple of minor errors in the documentation.

Check out http://robosavvy.com/Robonova/2

enjoy your Robonova :lol:
limor offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 1845
Joined: Mon Oct 11, 2004 1:00 am
Location: London, UK

Post by Pev » Fri Mar 17, 2006 4:02 pm

Post by Pev
Fri Mar 17, 2006 4:02 pm

Enjoy yourself - one suggestion - use a really good screwdriver - I tried about 3 before I found one that really worked for me. The screws are small and need a good driver.

Pev
Enjoy yourself - one suggestion - use a really good screwdriver - I tried about 3 before I found one that really worked for me. The screws are small and need a good driver.

Pev
Carl
-------------------------
www.alt-view.co.uk
Pev offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 547
Joined: Sun Feb 26, 2006 1:00 am
Location: UK

Post by bauermech » Fri Mar 17, 2006 5:05 pm

Post by bauermech
Fri Mar 17, 2006 5:05 pm

...maybe a pair of angled needlenose pliers too (small). When you get to putting the screws in for the front chest plate it gets a little rough :?
Oh what fun! :D It's hard, but take your time.
...maybe a pair of angled needlenose pliers too (small). When you get to putting the screws in for the front chest plate it gets a little rough :?
Oh what fun! :D It's hard, but take your time.
bauermech offline
Site Admin
Site Admin
User avatar
Posts: 318
Joined: Sat Feb 04, 2006 1:00 am
Location: Defiance, Ohio, USA

Post by rep001 » Fri Mar 17, 2006 6:43 pm

Post by rep001
Fri Mar 17, 2006 6:43 pm

Thanks folks for all the input,legs all done going well instructions are sometimes fun.must keep going bye for now
Thanks folks for all the input,legs all done going well instructions are sometimes fun.must keep going bye for now
rep001 offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 193
Joined: Thu Mar 09, 2006 1:00 am
Location: HERTS UK


5 postsPage 1 of 1
5 postsPage 1 of 1