RoBoard RB-100 + KRS-788HV ICS Red Version

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
2 postsPage 1 of 1
2 postsPage 1 of 1

RoBoard RB-100 + KRS-788HV ICS Red Version

Post by Eduardo.Maciel » Tue Mar 15, 2011 3:52 pm

Post by Eduardo.Maciel
Tue Mar 15, 2011 3:52 pm

Hi,

I bought a Roboard RB-100 for use in my robotics project, I like very much this product, is perfect.

But I have questions, someone uses the software of Microsoft Robotics Developer to program this hardware?

How to program a servo motor using the software "Microsoft Robotics Developer" for this hardware "Roboard RB-100"?

I need insert some code special within the software "Microsoft Robotics Developer" to run correctly the hardware "Roboard RB-100" and my servo motor Kondo KRS-788HV ICS Red Version?

Kind Regards,

Eduardo Maciel
Hi,

I bought a Roboard RB-100 for use in my robotics project, I like very much this product, is perfect.

But I have questions, someone uses the software of Microsoft Robotics Developer to program this hardware?

How to program a servo motor using the software "Microsoft Robotics Developer" for this hardware "Roboard RB-100"?

I need insert some code special within the software "Microsoft Robotics Developer" to run correctly the hardware "Roboard RB-100" and my servo motor Kondo KRS-788HV ICS Red Version?

Kind Regards,

Eduardo Maciel
Eduardo.Maciel offline
Newbie
Newbie
Posts: 1
Joined: Tue Mar 15, 2011 2:59 pm

Re: RoBoard RB-100 + KRS-788HV ICS Red Version

Post by roboard » Sat Mar 19, 2011 11:18 am

Post by roboard
Sat Mar 19, 2011 11:18 am

Eduardo.Maciel wrote:...

How to program a servo motor using the software "Microsoft Robotics Developer" for this hardware "Roboard RB-100"?

...


Hi,

there is a RoBoIO .NET Warper on RoBoard website (http://www.roboard.com/download_ml.htm). If you know how to create DSS, you can apply the .NET Warper to make RoBoIO DSS for use in MSRDS.

:)
Eduardo.Maciel wrote:...

How to program a servo motor using the software "Microsoft Robotics Developer" for this hardware "Roboard RB-100"?

...


Hi,

there is a RoBoIO .NET Warper on RoBoard website (http://www.roboard.com/download_ml.htm). If you know how to create DSS, you can apply the .NET Warper to make RoBoIO DSS for use in MSRDS.

:)
roboard offline
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am


2 postsPage 1 of 1
2 postsPage 1 of 1
cron