RB-Boa-03 MINIPCI-VGA-Z9S module

Based on DMP's Vortex processor / SoC this board is a full computer capable of running a standard Windows and Linux installation on the backpack of your robot.
4 postsPage 1 of 1
4 postsPage 1 of 1

RB-Boa-03 MINIPCI-VGA-Z9S module

Post by rv99 » Thu Jul 16, 2009 2:27 pm

Post by rv99
Thu Jul 16, 2009 2:27 pm

Hi -

Has anyone been able to get the LVDS output to work on the RB-Boa-03 card ? I can connect the VGA output, no problem, but cannot get a signal from the LVDS connector.

Thanks,
Rich
Hi -

Has anyone been able to get the LVDS output to work on the RB-Boa-03 card ? I can connect the VGA output, no problem, but cannot get a signal from the LVDS connector.

Thanks,
Rich
rv99 offline
Newbie
Newbie
Posts: 2
Joined: Thu Jul 16, 2009 2:24 pm

Post by roboard » Fri Jul 17, 2009 1:23 am

Post by roboard
Fri Jul 17, 2009 1:23 am

the LVDS output need special BIOS, cuz there is too many different LCD panel type, and it can not include in one BIOS, another word : connect PVI 5 inches panel need #1 BIOS, use another type then need another #2 BIOS
the LVDS output need special BIOS, cuz there is too many different LCD panel type, and it can not include in one BIOS, another word : connect PVI 5 inches panel need #1 BIOS, use another type then need another #2 BIOS
roboard offline
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am

Post by rv99 » Fri Jul 17, 2009 2:27 pm

Post by rv99
Fri Jul 17, 2009 2:27 pm

roboard wrote:the LVDS output need special BIOS, cuz there is too many different LCD panel type, and it can not include in one BIOS, another word : connect PVI 5 inches panel need #1 BIOS, use another type then need another #2 BIOS


Makes sense. Then how do I get the BIOS that I need for a flat panel that I need to use ?
roboard wrote:the LVDS output need special BIOS, cuz there is too many different LCD panel type, and it can not include in one BIOS, another word : connect PVI 5 inches panel need #1 BIOS, use another type then need another #2 BIOS


Makes sense. Then how do I get the BIOS that I need for a flat panel that I need to use ?
rv99 offline
Newbie
Newbie
Posts: 2
Joined: Thu Jul 16, 2009 2:24 pm

Post by roboard » Mon Jul 20, 2009 9:37 am

Post by roboard
Mon Jul 20, 2009 9:37 am

you can mail to tech@roboard.com
with LCD panel model name and data sheet (must require)
and there is too many LCD panel in the world, will not promise all can be support.
you can mail to tech@roboard.com
with LCD panel model name and data sheet (must require)
and there is too many LCD panel in the world, will not promise all can be support.
roboard offline
Savvy Roboteer
Savvy Roboteer
Posts: 302
Joined: Fri Jul 03, 2009 4:44 am


4 postsPage 1 of 1
4 postsPage 1 of 1
cron