Robobuilder

Korean company maker of Robot kits and servos designed for of articulated robots. Re-incarnation of Megarobotics.
2 postsPage 1 of 1
2 postsPage 1 of 1

Robobuilder

Post by nick2501 » Thu Mar 17, 2011 12:23 pm

Post by nick2501
Thu Mar 17, 2011 12:23 pm

Hi, I'm new at this and thinking of using the robobuilder to identify certain routes. I would like to use an Overo™ Water COM - Gumstix and some kind of camera. If someone could advise were to start from this would help alot.
Thank you
Hi, I'm new at this and thinking of using the robobuilder to identify certain routes. I would like to use an Overo™ Water COM - Gumstix and some kind of camera. If someone could advise were to start from this would help alot.
Thank you
nick2501 offline
Robot Builder
Robot Builder
Posts: 8
Joined: Thu Mar 17, 2011 12:18 pm

Camera on Gumstix

Post by Yamini » Fri Mar 18, 2011 6:01 am

Post by Yamini
Fri Mar 18, 2011 6:01 am

Hi,

it depends on what you want to use the camera for.

1. If you want to use in machine vision applications then you can use the Gumstix camera launched here http://www.gumstix.com/store/catalog/pr ... cts_id=254. This can do a VGA @60fps.

2. If you need higher resolution capture like 3M pixel or above, then you can try www.e-consystems.com/omapovero.asp. This supports autofocus too. This can do a 720p@30fps.

so, based on the application you choose one of these two.

Yaks
Hi,

it depends on what you want to use the camera for.

1. If you want to use in machine vision applications then you can use the Gumstix camera launched here http://www.gumstix.com/store/catalog/pr ... cts_id=254. This can do a VGA @60fps.

2. If you need higher resolution capture like 3M pixel or above, then you can try www.e-consystems.com/omapovero.asp. This supports autofocus too. This can do a 720p@30fps.

so, based on the application you choose one of these two.

Yaks
Yamini offline
Newbie
Newbie
Posts: 1
Joined: Fri Mar 18, 2011 5:54 am


2 postsPage 1 of 1
2 postsPage 1 of 1
cron