RoboRobo Black Line Pro

Anything that doesn't fit our other forums goes here.
1 postPage 1 of 1
1 postPage 1 of 1

RoboRobo Black Line Pro

Post by Zimmer » Fri Jan 25, 2013 4:27 am

Post by Zimmer
Fri Jan 25, 2013 4:27 am

Hello,
I am not sure if this is the right place to put this but I have a RoboRobo Black Line Pro (2011 Line Tracing robot). Recently the start button has not been working very well, and now it has stopped working altogether. When pressed, it does nothing, although the Reset button still works. When I tried manually connecting the two points on the underside of the robot with some wire, it also did nothing, eliminating the possibility of a bad button. When I did the same thing to the Reset button, it worked, but not on the Start button. I am wondering if this is a motherboard problem, or something else is wrong. I am posting here because there is really no documentation on the robot online or on Robosavvy. Any help is appreciated. Thanks!
Hello,
I am not sure if this is the right place to put this but I have a RoboRobo Black Line Pro (2011 Line Tracing robot). Recently the start button has not been working very well, and now it has stopped working altogether. When pressed, it does nothing, although the Reset button still works. When I tried manually connecting the two points on the underside of the robot with some wire, it also did nothing, eliminating the possibility of a bad button. When I did the same thing to the Reset button, it worked, but not on the Start button. I am wondering if this is a motherboard problem, or something else is wrong. I am posting here because there is really no documentation on the robot online or on Robosavvy. Any help is appreciated. Thanks!
Zimmer offline
Newbie
Newbie
Posts: 1
Joined: Fri Jan 25, 2013 4:15 am

1 postPage 1 of 1
1 postPage 1 of 1
cron