Products considered to extend Robosavvy's Product Portfolio

Anything that doesn't fit our other forums goes here.
3 postsPage 1 of 1
3 postsPage 1 of 1

Products considered to extend Robosavvy's Product Portfolio

Post by PedroR » Wed Aug 12, 2009 1:24 pm

Post by PedroR
Wed Aug 12, 2009 1:24 pm

Hi

I have been looking at adding some new forms of interaction to our product catalogue:

- Speaker output systems - to have you robot speak or something like that :)

I have found 2 and would really like your opinion on which you'd prefer:

One is TTL: http://www.quadravox.com/store/proddeta ... prod=QV606 has built in memory and amplifier but needs a USB2Serial programmer for downloading the sounds.

The other one is SPI: http://www.4dsystems.com.au/prod.php?id=73
This one uses a MicroSD card where you save the sound files. However the use of SPI doesn't really help I guess....

- We also found a new Voice Recognition System that is TTL as well.
This one was developed for Robonova but it is also compatible with any host that has TTL level UART (Arduino for example is a good candidate :) )
I'll have to check if it works with the new Bioloid because the new CM510 exposes a second UART.

- Finally there is a new embedded Camera from 4d Systems:
http://www.4dsystems.com.au/prod.php?id=75
It uses TTL serial as well.

What is your opinion on this?
Do you find any of these interesting for your robots or projects?

Pedro.
Hi

I have been looking at adding some new forms of interaction to our product catalogue:

- Speaker output systems - to have you robot speak or something like that :)

I have found 2 and would really like your opinion on which you'd prefer:

One is TTL: http://www.quadravox.com/store/proddeta ... prod=QV606 has built in memory and amplifier but needs a USB2Serial programmer for downloading the sounds.

The other one is SPI: http://www.4dsystems.com.au/prod.php?id=73
This one uses a MicroSD card where you save the sound files. However the use of SPI doesn't really help I guess....

- We also found a new Voice Recognition System that is TTL as well.
This one was developed for Robonova but it is also compatible with any host that has TTL level UART (Arduino for example is a good candidate :) )
I'll have to check if it works with the new Bioloid because the new CM510 exposes a second UART.

- Finally there is a new embedded Camera from 4d Systems:
http://www.4dsystems.com.au/prod.php?id=75
It uses TTL serial as well.

What is your opinion on this?
Do you find any of these interesting for your robots or projects?

Pedro.
PedroR offline
Savvy Roboteer
Savvy Roboteer
Posts: 1199
Joined: Mon Jun 16, 2008 11:07 pm

Re: Products considered to extend Robosavvy's Product Portfo

Post by srobot » Wed Aug 12, 2009 4:35 pm

Post by srobot
Wed Aug 12, 2009 4:35 pm

Hey Pedro,

I am interested in the Voice Recognition System. More details would be great!
Hey Pedro,

I am interested in the Voice Recognition System. More details would be great!
Dell Latitude D520, Windows XP, 4 GB RAM, 80 GB HDD, Intel Core 2 Duo. The power that's needed!

RIBO Labs, Springing Robotic Development to a New Level
srobot offline
Savvy Roboteer
Savvy Roboteer
User avatar
Posts: 401
Joined: Sun Dec 10, 2006 1:00 am
Location: Deep in robot parts

Post by PedroR » Thu Aug 13, 2009 6:13 pm

Post by PedroR
Thu Aug 13, 2009 6:13 pm

Hi srobot

We finally got more details.

They are here

VRbot protocol (protocol on the TTL serial line):
http://robosavvy.com/RoboSavvyPages/VRb ... otocol.pdf

Software for setting the Voice commands:
http://robosavvy.com/RoboSavvyPages/VRb ... -1.0.6.zip

Also make sure you check out the sample video here:
http://www.youtube.com/watch?v=POSJNgdKgGg

It is a bit long and is about installing it on Robonova I although it can be used with any other device that has a COMM port at TTL level.
Hi srobot

We finally got more details.

They are here

VRbot protocol (protocol on the TTL serial line):
http://robosavvy.com/RoboSavvyPages/VRb ... otocol.pdf

Software for setting the Voice commands:
http://robosavvy.com/RoboSavvyPages/VRb ... -1.0.6.zip

Also make sure you check out the sample video here:
http://www.youtube.com/watch?v=POSJNgdKgGg

It is a bit long and is about installing it on Robonova I although it can be used with any other device that has a COMM port at TTL level.
PedroR offline
Savvy Roboteer
Savvy Roboteer
Posts: 1199
Joined: Mon Jun 16, 2008 11:07 pm


3 postsPage 1 of 1
3 postsPage 1 of 1
cron